Unit of competency Outline

Date retreived
22/07/2026 8:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Interpret designs to prepare timber floor system drawings and documents using computers

Interpret designs to prepare timber floor system drawings and documents using computers

Unit of competency
National Code
FWPTMM3205
State Code
AXJ67
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
040301 - Building Science And Technology
Original Release Date
05/10/2016
Nominal Hours
75
Description
This unit of competency describes the outcomes required to interpret designs and plans to produce a limited range of floor system drawings and production documents using computers in a timber production or design setting.The unit applies to Designer, Timber Manufactured Products Technician, Production Supervisor. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Interpret plans and designs
  • 1.1 Gather information about designs and plans, design factors and specifications.
  • 1.2 Access and interpret industry and organisational codes and standards to ensure production of compliant drawings and production documents.
  • 1.3 Identify stakeholders and consult where clarification is needed.
2. Create floor systems
  • 2.1 Design floor systems to ensure compliance with identified standards.
  • 2.2 Check computer software for currency.
  • 2.3 Input applied loads and data to software.
  • 2.4 Identify load transfers and load bearing points.
  • 2.5 Input floor area and create floor systems layout.
  • 2.6 Refer design requirements outside software limitations to appropriate personnel for resolution.
3. Review floor system layouts
  • 3.1 Identify available materials and other production efficiencies and amend designs.
  • 3.2 Review designs to ensure identified standards are maintained.
  • 3.3 Follow organisational procedures to refer design variations to relevant stakeholders where design varies from identified standards.
4. Create outputs
  • 4.1 Prepare drawings and documentation in line with identified standards.
  • 4.2 Store drawings and documentation and communicate to relevant stakeholders.
No information
No information
State Code National Code Title Type
BAK6 FWP30916 Certificate III in Timber Truss and Frame Design and Manufacture Qualification