Unit of competency Outline
Date retreived
22/07/2026 3:08 PM AWST
22/07/2026 3:08 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce basic adhesive, mechanical or thermal fastened product
Produce basic adhesive, mechanical or thermal fastened product
Unit of competency
National Code
ICPCBF2620
ICPCBF2620
State Code
OBP41
OBP41
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to produce basic adhesive, mechanical or thermal fastened product, monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and clean and shut down equipment.It applies to individuals in the printing and graphic arts industry who produce basic adhesive, mechanical or thermal fastened product to meet production requirements. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain sheet delivery system
- 1.1 Monitor and adjust feeder and delivery systems to maintain continuous feeding to machine
- 1.2 Monitor and adjust sheet pick-up and transport system is to maintain continuous sheet handling and operations
- 1.3 Monitor and adjust transfer systems to maintain continuous sheet handling and operation
- 1.4 Add substrate to process according to job specifications
2. Maintain production process
- 2.1 Monitor and adjust registration of fastening to maintain product quality according to approved sample standard
- 2.2 Monitor and adjust identified system to maintain product quality according to approved sample standard
- 2.3 Monitor and adjust basic in-line printing, converting, binding and finishing processes to maintain product quality according to approved sample standard
- 2.4 Use machine control according to job specifications
- 2.5 Monitor and verify performance using the process control system according to enterprise procedures
3. Identify and rectify problems and faults
- 3.1 Identify and report problems in machines according to enterprise procedures
- 3.2 Carry out adjustments and corrections according to specified procedures and within scope of own role
- 3.3 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
- 3.4 Verify repairs and adjustments prior to resumption of operations
4. Conduct shutdown of production process
- 4.1 Follow shutdown sequence is followed according to manufacturer specifications and enterprise procedures
- 4.2 Remove substrate waste from operating area and recycle and dispose of, where required, according to regulatory requirements and enterprise procedures
- 4.3 Disengage and clean mechanical fastening unit ready for next run
- 4.4 Disengage and clean thermal fastening ready for next run
- 4.5 Wash glue system ready for next run
- 4.6 Clean in-line printing, converting, binding and finishing units ready for next run
- 4.7 Disengage and clean transportation and delivery systems ready for next run
- 4.8 Complete production records and other documentation according to enterprise procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUM82 | ICPCBF262 | Produce basic adhesive, mechanical or thermal fastened product | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFC3 | ICP20120 | Certificate II in Printing and Graphic Arts | Qualification |