Unit of competency Outline

Date retreived
22/07/2026 9:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain joining machines

Set up, operate and maintain joining machines

Unit of competency
National Code
MSFFM3014
State Code
WI435
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
36
Description
This unit of competency covers setting up, operating and maintaining joining machines using their full potential and capacities in the production of furniture.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements, including design, quality, materials, equipment and quantities
  • 1.2 Cutting list and job specifications are read and interpreted
  • 1.3 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.4 Material for machining is selected and inspected for quality
  • 1.5 Joining machines, cutting tools and jigs are identified and checked for safe and effective operation
  • 1.6 Procedures are determined for minimising waste material
  • 1.7 Procedures are identified for maximising energy efficiency while completing the job
2 Set up machines
  • 2.1 Safety equipment, including emergency stops, gauges, guards and controls are checked
  • 2.2 Joining machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  • 2.3 Trial runs are conducted to check machine operation, accuracy and quality of finished work
  • 2.4 Necessary adjustments are made to machine settings
3 Operate machines
  • 3.1 Machine start-up procedure is carried out in accordance with manufacturer instructions
  • 3.2 Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures
  • 3.3 Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations
  • 3.4 Machine operation is monitored to ensure product quality and output
  • 3.5 Waste quantities are checked and minimised
  • 3.6 Items that do not meet quality requirements are recycled or discarded according to workplace procedures
  • 3.7 Problems with the required work and/or the operation of the machine are identified and reported to appropriate persons
4 Finalise operation and maintain equipment
  • 4.1 Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 4.2 Machinery is cleaned and left in a safe mode
  • 4.3 Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
  • 4.4 Unused hardware is collected and stored for re-use or disposal following workplace procedures
  • 4.5 Waste and scrap materials are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8623 LMFFM3022B Set up, operate and maintain joining machines Unit of competency
Replaced By
State Code National Code Title Type
OEK51 MSFFM3034 Set up, operate and maintain joining machines Unit of competency