Unit of competency Outline
Date retreived
22/07/2026 8:01 PM AWST
22/07/2026 8:01 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Manage personal workplace
Manage personal workplace
Unit of competency
National Code
AUM2007B
AUM2007B
State Code
W9134
W9134
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
03/03/2011
Field of Education
120505 - Work Practices Programmes
Original Release Date
03/03/2011
Nominal Hours
12
Description
This unit describes the application of the required skills and knowledge to manage personal workplaces to achieve work production and quality goals. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify and achieve work production goals
- 1.1. Procedural instructions for the job are obtained, interpreted and clarified, if necessary, with appropriate personnel
- 1.2. Relevant specifications for task outcomes are obtained, interpreted and clarified, if necessary, with appropriate personnel
- 1.3. Schedules and work plans are obtained, interpreted and clarified, if necessary, with appropriate personnel so that completion times and other requirements are identified
- 1.4. Procedural instructions, task specifications, schedules and work plans are effectively applied throughout work
- 1.5. Achievement of work production goals is reviewed and responded to by team members
2. Identify and achieve workquality goals
- 2.1. Quality instruction and procedures for the job are obtained, interpreted and clarified, if necessary, with appropriate personnel
- 2.2. Quality performance indicators are obtained, interpreted and clarified, if necessary, with appropriate personnel
- 2.3. Quality instructions and procedures are effectively applied throughout the work
- 2.4. Satisfaction of quality performance indicators is continuously monitored and variations responded to promptly
- 2.5. Achievement of quality goals is reviewed and recommendations for changes/improvements are discussed and developed
3. Respond flexibly to changed work requirements
- 3.1. The need and reason for changes in work requirements are clarified with appropriate personnel
- 3.2. Changes in schedules and work requirements are recognised, acknowledged and responded to positively when they occur
- 3.3. Changed requirements are responded to, in accordance with organisation procedures, to meet objectives and task requirements
- 3.4. Outcomes are compared with planned objectives, tasks, instructions, specifications and task requirements
4. Contribute to cost reduction initiatives
- 4.1. Measures to control and/or minimise costs in the work area are identified and clarified with the appropriate personnel
- 4.2. Cost performance indicators and related work processes are identified, interpreted and clarified
- 4.3. Cost aspects of processes are applied and/or monitored throughout the work
- 4.4. Achievement of cost reduction targets is reviewed in conjunction with the team/works leader and the targets are continued/modified as necessary
5. Predict and recognize problems and take appropriate action
- 5.1. Problems which will have an impact on work plans are predicted if possible, and recognised when they occur
- 5.2. Action is taken to adjust work plans when changes to schedules occur and the action is promptly reported
supervisors
team members
team leaders
suppliers
clients and managers.
those established within each organisation quality system and may include identification, minimisation and elimination of defects, product/component specifications, tolerances, inspection systems, packaging specifications and non-conforming parts or products.
process change
line speed
interruptions to parts supply/quality and personnel absences.
cost benchmarks
waste avoidance
power conservation
productivity achievement
continuous improvement levels.
team members
team leaders
suppliers
clients and managers.
those established within each organisation quality system and may include identification, minimisation and elimination of defects, product/component specifications, tolerances, inspection systems, packaging specifications and non-conforming parts or products.
process change
line speed
interruptions to parts supply/quality and personnel absences.
cost benchmarks
waste avoidance
power conservation
productivity achievement
continuous improvement levels.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the following is essential:
compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and organisation policies and procedures for managing personal work priorities
maintaining a working knowledge of current work systems and practices
working and communicating effectively and positively with others involved in the work
applying, within authority, the requirements of the job or work role in relation to:
achieving production goals
achieving work quality goals
responding positively to changing work requirements
contributing effectively to cost reduction initiatives
effectively applying problem solving techniques
modify activities to cater for variations in organisation context and environment.
Context of and specific resources for assessment
assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process
assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
assessment must take place in accordance with the endorsed
assessment methods must confirm consistency and accuracy of performance (over time and in a range of organisation relevant contexts) together with application of underpinning knowledge
assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application
assessment may be applied under project related conditions (real or simulated) and require evidence of process
assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Evidence of the following is essential:
compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and organisation policies and procedures for managing personal work priorities
maintaining a working knowledge of current work systems and practices
working and communicating effectively and positively with others involved in the work
applying, within authority, the requirements of the job or work role in relation to:
achieving production goals
achieving work quality goals
responding positively to changing work requirements
contributing effectively to cost reduction initiatives
effectively applying problem solving techniques
modify activities to cater for variations in organisation context and environment.
Context of and specific resources for assessment
assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process
assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
assessment must take place in accordance with the endorsed
assessment methods must confirm consistency and accuracy of performance (over time and in a range of organisation relevant contexts) together with application of underpinning knowledge
assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application
assessment may be applied under project related conditions (real or simulated) and require evidence of process
assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5787 | AUM9007A | Manage personal work priorities | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE088 | AUMAMA2001 | Manage personal workplace | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W561 | AUM20108 | Certificate II in Automotive Manufacturing (Passenger Motor Vehicle) | Qualification |
| W560 | AUM10108 | Certificate I in Automotive Manufacturing (Passenger Motor Vehicle) | Qualification |