Unit of competency Outline

Date retreived
22/07/2026 4:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Sample, inspect and test products to specifications

Sample, inspect and test products to specifications

Unit of competency
National Code
MSFFT4007
State Code
WI456
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
080317 - Quality Management
Original Release Date
20/06/2014
Nominal Hours
36
Description
This unit of competency covers taking product samples, identifying and applying authorised testing procedures, interpreting test results and reporting findings within a furnishing enterprise.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify specifications and test procedures
  • 1.1 Product quality specifications are read, drawings interpreted and test parameters are identified
  • 1.2 Test methods for each required test parameter are identified and the most efficient test method is noted
  • 1.3 Any requirement for testing by personnel external to the work area is identified and appropriate permission is obtained
  • 1.4 Design features that impact on testing and inspection are identified
2 Select evidence
  • 2.1 Appropriate conforming and/or non-conforming products, materials and/or waste are selected for testing in accordance with enterprise requirements
  • 2.2 Observations of operators and copies of procedures are collected
3 Conduct and interpret tests
  • 3.1 Tests are conducted following workplace procedures and results are documented
  • 3.2 Comparisons of all data collected are made
  • 3.3 Any recommendations are noted and considered for feasibility
4 Report findings
  • 4.1 Findings of tests are documented
  • 4.2 Any potential or existing problems and appropriate recommendations are identified and reported in accordance with enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
W8644 LMFFT4007B Sample, inspect and test products to specifications Unit of competency
Replaced By
State Code National Code Title Type
ODZ48 MSFFDM4018 Research and organise product inspection and testing Unit of competency