Unit of competency Outline

Date retreived
22/07/2026 7:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce decorative veneers

Produce decorative veneers

Unit of competency
National Code
FWPWPP3230
State Code
AXJ11
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to produce decorative veneers in readiness for application to chipboard, medium density fibreboard, plywood or other board products following customer order specifications.The unit applies to production operators and technicians who produce decorative veneers in a forest and wood products factory settingLicensing, legislative, regulatory or certification requirements apply to this unit in some states and territories at the time of publication, and may differ according to jurisdiction.
Notes
Elements and Performance Criteria
1. Prepare for production of veneer.
  • 1.1 Review work order and check with appropriate personnel.
  • 1.2 Identify and follow safe work procedure for producing decorative veneers.
  • 1.3 Identify hazards and control risk in the work area.
  • 1.4 Acquire type and quantity of decorative veneer to be produced, from veneer production process.
  • 1.5 Select equipment and conduct pre-start check in line with manufacturer's recommendations and site requirements.
  • 1.6 Select veneer production process in line with site procedures.
  • 1.7 Establish and maintain communication with relevant personnel as required, to ensure safety and production requirements are met.
2. Produce decorative veneer and dispose of sub-standard material
  • 2.1 Visually inspect veneer for decorative qualities, layout design, defects and select for use.
  • 2.2 Select joining points and cut veneer in line with layout design.
  • 2.3 Prepare decorative veneers for joining and bonding to panel product.
  • 2.4 Check completed veneers for conformity to work order and repair any imperfections.
  • 2.5 Mark completed veneers for designated joining sequence in line with layout design.
  • 2.6 Reject and dispose of sub-standard decorative veneers in line with site procedures and environmental requirements.
3. Regrade and redistribute veneer, clean up and maintain records.
  • 3.1 Assess joins and regrade veneer in line with site requirements and industry standards.
  • 3.2 Direct and move material to storage or processing operations in line with site requirements.
  • 3.3 Reject and dispose of sub-standard material in line with site requirements.
  • 3.4 Clean work area in line with safe work procedure and site requirements.
  • 3.5 Record and report decorative veneer process and equipment faults to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6144 FPIWPP3230B Produce decorative veneers Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification