Unit of competency Outline
Date retreived
22/07/2026 6:00 PM AWST
22/07/2026 6:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Implement sustainable forestry practices
Implement sustainable forestry practices
Unit of competency
National Code
FPICOT5201B
FPICOT5201B
State Code
D5970
D5970
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
05/08/2014
Field of Education
050501 - Forestry Studies
Original Release Date
05/08/2014
Nominal Hours
120
Description
This unit describes the outcomes required to prepare and implement sustainable forestry practices. It requires an ability to undertake consultative and audit processes to assess the effectiveness of environmental management strategies and to identify areas for change or improved practiceGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPICOT5201A Implement sustainable forestry practices
Notes
Elements and Performance Criteria
1. Prepare for and implement sustainable forestry strategies
- 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to implementing sustainable forestry practices are identified and followed
- 1.2. Environmental management strategies are developed and implemented using available resources in line with organisational guidelines
- 1.3. Consultative processes are used to negotiate and agree strategy processes, objectives and timelines
- 1.4. Strategies are assessed for effectiveness in reducing waste disposal in line with organisational environmental management policies
- 1.5. Strategies are revised to ensure ongoing improvement in line with organisational requirements
2. Manage integrity of water bodies
- 2.1. Water is sourced and used from locations other than mains water, as required in line with organisational and legislative guidelines
- 2.2. Run-off water is managed to optimise use and minimise pollutants in line with organisational environmental management practice
- 2.3. Planting strategies are developed to efficiently and appropriately use available water supply and manage run-off
- 2.4. Irrigation/watering strategies are developed in line with organisational guidelines
3. Manage integrity of soil
- 3.1. Wind and water erosion is minimised by planting patterns and species
- 3.2. Nutrients and texture of the soil are managed to maintain soil productivity
- 3.3. Irrigation/watering strategies are developed in line with organisational guidelines
4. Undertake an environmental audit
- 4.1. Need for environmental audit is determined and audit is conducted in line with organisational policies and procedures
- 4.2. Environmental considerations are covered in the audit, in line with organisational policies and legislative requirements
- 4.3. Recommendations are developed that are verifiable and sufficiently detailed to meet audit and organisational requirements
- 4.4. Business equipment and technology are used to access, analyse and organise information in line with organisational requirements
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Sustainable forestry practices may include:
management of fire and weeds
soils, including tropical soils
tropical forestry practices
Consultative processes may include:
face-to-face meetings
telephone
facsimile
written and email communication
Improvement may include:
ongoing waste reduction
energy and water efficiency
taking advantage of newly available technologies
Pollutants
may enter the river and drainage systems
Irrigation/watering strategies may include:
minimising evaporation
run-off
accurate delivery of water
Considerations may include:
topography
water use
current policies and practices
waste emissions and materials
energy use
characteristics of area
legal obligations
sustainable forestry management
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Sustainable forestry practices may include:
management of fire and weeds
soils, including tropical soils
tropical forestry practices
Consultative processes may include:
face-to-face meetings
telephone
facsimile
written and email communication
Improvement may include:
ongoing waste reduction
energy and water efficiency
taking advantage of newly available technologies
Pollutants
may enter the river and drainage systems
Irrigation/watering strategies may include:
minimising evaporation
run-off
accurate delivery of water
Considerations may include:
topography
water use
current policies and practices
waste emissions and materials
energy use
characteristics of area
legal obligations
sustainable forestry management
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently implement sustainable forestry practices in line with organisational and legislative guidelines
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to implementing sustainable forestry practices
following organisational policies and procedures relevant to implementing sustainable forestry practices
communicating and consulting with colleagues and stakeholders to obtain feedback and negotiate strategic processes, objectives and timelines in order to implement sustainable forestry practices
using business equipment and technology to prepare and implement environmental management strategies using available resources and incorporating sound environmental management practices
auditing and evaluating environmental management strategies and implementing identified changes and improved practices
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently implement sustainable forestry practices in line with organisational and legislative guidelines
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to implementing sustainable forestry practices
following organisational policies and procedures relevant to implementing sustainable forestry practices
communicating and consulting with colleagues and stakeholders to obtain feedback and negotiate strategic processes, objectives and timelines in order to implement sustainable forestry practices
using business equipment and technology to prepare and implement environmental management strategies using available resources and incorporating sound environmental management practices
auditing and evaluating environmental management strategies and implementing identified changes and improved practices
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S4643 | FPICOT5201A | Implement sustainable forestry practices | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWK67 | FWPCOT5201 | Implement sustainable forestry practices | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S487 | FPI50105 | Diploma of Forest and Forest Products | Qualification |
| J478 | FPI50111 | Diploma of Forest and Forest Products | Qualification |
| J613 | FPI60113 | Advanced Diploma of Forest Industry Sustainability | Qualification |