Unit of competency Outline

Date retreived
22/07/2026 1:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service line trimming systems and components

Service line trimming systems and components

Unit of competency
National Code
AURP245465B
State Code
D7635
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
8
Description
This unit of competency describes the skills and knowledge required to service line trimming systems, including removal, replacement, fitting and adjustment of components.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for service operation
  • 1.1. Identify and confirm work to be carried out
  • 1.2. Access and interpret service and repair procedures, workshop manuals and manufacturer's information
  • 1.3. Identify and prepare tools, equipment and materials required for servicing job
  • 1.4. Set up work area
2. Determine service requirements
  • 2.1. Check customer requirements and equipment specifications following workplace procedures
  • 2.2. Check line trimming system components for suitability of purpose
  • 2.3. Plan and cost service procedure
  • 2.4. Discuss recommended service items with customer and obtain authorisation to proceed
3. Service line trimming system
  • 3.1. Identify and observe applicable occupational health and safety (OHS) requirements, including state/territory regulatory requirements and personal protection needs
  • 3.2. Plan task sequence to include testing and checking processes
  • 3.3. Select tooling and equipment to meet job requirements and check to ensure they are in good working order
  • 3.4. Remove components as planned and inspect for condition and serviceability
  • 3.5. Discard unusable components and retain reusable and components following workplace procedures
  • 3.6. Fit reusable and replacement components and adjust to line trimming system specifications and customer requirements
4. Check line trimming system for normal operation
  • 4.1. Operate line trimming system through full operating range
  • 4.2. Check operation against equipment specifications and customer requirements
  • 4.3. Make any adjustments as required and re-test
  • 4.4. Complete workplace documentation and update customer and warranty information as required
5. Complete work and return unit to customer
  • 5.1. Inspect serviced unit to ensure protective guards, cowlings and safety features are in place
  • 5.2. Clean unit to workplace expectations
  • 5.3. Clean work area, dispose of waste, and store tools and equipment in accordance with workplace procedures
  • 5.4. Provide customer report on service and replacements and explain follow-up adjustments, use and care of equipment and warranty requirements
No information
No information
Replaces
State Code National Code Title Type
W2919 AURP245465A Remove, fit and adjust line trimming system components Unit of competency
Replaced By
State Code National Code Title Type
WF298 AURPTA2006 Service line trimming systems and components Unit of competency
State Code National Code Title Type
D542 AUR30711 Certificate III in Outdoor Power Equipment Qualification