Unit of competency Outline
Date retreived
22/07/2026 9:41 AM AWST
22/07/2026 9:41 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Prepare and service light competition vehicles
Prepare and service light competition vehicles
Unit of competency
National Code
AURMTA101
AURMTA101
State Code
OCL55
OCL55
TGA Status
Deleted
Deleted
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to prepare and service an already assembled light competition vehicle in the workshop or at a motor sport event. It involves preparing for the task, servicing the light competition vehicle, making adjustments as required, and completing workplace processes and documentation. The light competition vehicles are under 300 kg of unladen weight, such as go-carts, motorcycles or jet skis.The unit applies to those working in the motor sport industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1 Determine job requirements from team instructions, category rules and supplementary regulations
- 1.2 Source servicing procedures and information
- 1.3 Identify hazards associated with the work and manage risks
- 1.4 Select and check tools, equipment and materials for serviceability
- 1.5 Clean work area and lay out for job requirements
- 1.6 Report problems with work area or operation of equipment to personnel as required
2. Prepare competition vehicle
- 2.1 Position and secure vehicle ready for servicing according to manufacturer specifications and workplace procedures
- 2.2 Remove temporary bungs and covers and conduct engine pre-start checks according to team procedures and safety and environmental requirements
- 2.3 Carry out pre-service inspection and preparation according to manufacturer specifications, workplace procedures and safety requirements
- 2.4 Report inspection findings according to workplace procedures, and report recommendations for service, repairs or adjustments
3. Service competition vehicle
- 3.1 Carry out service and adjustments according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
- 3.2 Start vehicle and systems, check pressures and temperatures for abnormal noise and leaks, according to team procedures and safety and environmental requirements
- 3.3 Check vehicle sub-assembly and systems operation according to team procedures and safety and environmental requirements
- 3.4 Shield vehicle components as required and according to team procedures
- 3.5 Document and report potential or existing problems to personnel as required and according to team procedures
4. Complete work processes
- 4.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
- 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXC03 | AURMTA001 | Prepare and service light competition vehicles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGA0 | AUR21020 | Certificate II in Motor Sport Technology | Qualification |