Unit of competency Outline

Date retreived
22/07/2026 8:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct electrical/electronic circuitry tests

Conduct electrical/electronic circuitry tests

Unit of competency
National Code
DEFEXO012
State Code
AVS24
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
27/03/2024
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to set up and conduct simple electrical/electronic circuitry tests on explosive ordnance or component parts. These tests are required to be conducted on a wide range of explosive ordnance during maintenance procedures.This unit applies to those required to set up and conduct simple electrical/electronic circuitry tests on explosive ordnance or component parts.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently and as part of a team, under direct and/or indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform specific tasks in a range of contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare electrical/electronic circuitry for testing
  • 1.1 Identify testing requirements from work requests/instructions
  • 1.2 Identify, acquire and prepare technical references, tools and equipment required for the tests
  • 1.3 Identify, acquire, prepare, move and position explosive ordnance or component parts in preparation for the task
  • 1.4 Identify, calculate and assess net explosive quantities and compatibility and apply throughout the operation
  • 1.5 Monitor and maintain environmental conditions
2 Conduct electrical/electronic circuitry tests
  • 2.1 Conduct required tests
  • 2.2 Record and maintain test results
  • 2.3 Interpret emergency procedures and apply contingency plans
3 Finalise post test procedures
  • 3.1 Return explosive ordnance or component parts to storage
  • 3.2 Ensure serviceability of equipment/tools
  • 3.3 Maintain documentation and records
No information
No information
No information