Unit of competency Outline
Date retreived
22/07/2026 3:19 PM AWST
22/07/2026 3:19 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Convert skills and knowledge from allied trades for employment in aviation maintenance workshops
Convert skills and knowledge from allied trades for employment in aviation maintenance workshops
Unit of competency
National Code
MEACOM0029
MEACOM0029
State Code
OEG66
OEG66
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
60
Description
This unit describes the skills and knowledge required to apply common core skills and knowledge that are aviation maintenance-specific and meet the requirements of the two regulators, the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA). The skills and knowledge will be applied during the maintenance of items of aeronautical product in aviation maintenance workshops.The unit applies to individuals with Certificate III or Certificate IV qualifications in allied trades (primarily automotive, electrotechnology or metals and engineering) who will be employed in aviation maintenance workshops. It covers aviation maintenance-specific parts of common core competencies that must be applied by all individuals employed to maintain items of aeronautical product and that have not been covered in allied trade units relating to similar areas of expertise.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify and access aviation industry manuals, specifications and drawings
- 1.1 Identify and access appropriate manuals for the type of aircraft or component being maintained
- 1.2 Establish amendment status from documentation to ensure the correct specifications and procedures are applied
2. Amend and store manuals, specifications or drawings
- 2.1 Incorporate and document manual, specification or drawing changes or amendments, including current or approved amendment status, in accordance with statutory regulations and/or enterprise procedures
- 2.2 Store manuals, specifications or drawings to ensure prevention of damage, ready access and required updating of information in accordance with regulatory or enterprise procedures
3. Apply standard trade practices
- 3.1 Lay out and fabricate simple items from common aircraft materials
- 3.2 Select and use common types of aircraft attachment hardware to meet specified requirements and suit construction material
- 3.3 Select and use common types of safety locking devices and fasteners to meet requirements
- 3.4 Lockwire aircraft components, devices and hardware, using the appropriate wire gauge
- 3.5 Assemble or connect common types of aircraft connectors and plumbing and apply required safety locking devices to meet requirements
- 3.6 Assemble or connect aircraft control cables and apply required safety locking devices to meet requirements
4. Interpret and apply quality standards in the aviation maintenance environment
- 4.1 Communicate standards or specifications in maintenance documents and identify and interpret process specifications
- 4.2 Identify, confirm and apply enterprise quality requirements
5. Plan steps and organise work to complete task
- 5.1 Plan work steps in conjunction with the work of other personnel to achieve practical outcomes in accordance with relevant aircraft publications, maintenance regulations, orders and standards and practices
- 5.2 Allow for human factors and work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS), in planning of steps
- 5.3 Organise work activity with other involved personnel, allowing for relevant human factors and using relevant communication processes to ensure safe and appropriate sequencing of tasks
- 5.4 Complete and record all necessary documentation related to job planning and progress in accordance with relevant aircraft publications, maintenance regulations, orders and standards and practices
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUE24 | MEA145 | Conversion from allied trades for employment in aviation maintenance workshops | Unit of competency |