Unit of competency Outline

Date retreived
22/07/2026 7:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Control traffic as a pilot vehicle operator

Control traffic as a pilot vehicle operator

Unit of competency
National Code
TLIF3060
State Code
AWM21
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
22/11/2021
View on TGA
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030909 - Transport Engineering
Original Release Date
04/08/2016
Nominal Hours
15
Description
This unit involves the skills and knowledge required to control traffic as a pilot vehicle operator. It includes applying control procedures, coordinating traffic, maintaining effective communication, maintaining equipment using prescribed traffic control stop/slow bats and communicating effectively with persons involved.Work involves applying basic principles, routine procedures and regulatory requirements to control traffic as a pilot vehicle operator.Work is performed independently with minimum supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Apply control procedures
  • 1.1 Legislative responsibilities and requirements are identified, interpreted and applied
  • 1.2 Work health and safety (WHS)/occupational health and safety (OHS) requirements are identified, interpreted and applied
  • 1.3 Workplace procedures and requirements are identified, interpreted and applied
  • 1.4 Appropriate personal protective equipment (PPE) is selected and used in accordance with workplace procedures
  • 1.5 Traffic control equipment is selected in accordance with task requirements and workplace procedures
2 Coordinate traffic
  • 2.1 Vehicles and pedestrians are monitored to ensure safety of persons and property
  • 2.2 Hazards are identified, risks are assessed, and control measures are implemented
  • 2.3 Adjustments are made for changing conditions and to ensure best traffic flow
  • 2.4 Handheld signs (bats) are positioned in accordance with operating procedures and maximum visibility is provided
  • 2.5 Mishaps or accidents are managed in accordance with workplace procedures and relevant legislation
3 Maintain effective communication
  • 3.1 Effective communication is maintained between all parties
  • 3.2 Appropriate language and protocols are used during communication
  • 3.3 Messages are transmitted concisely in accordance with workplace procedures
  • 3.4 Electronic communications power supply is maintained in accordance with manufacturer instructions
  • 3.5 After a period of non-contact, radio or other electronic contact is checked to ensure effective operation in accordance with workplace procedures
4 Maintain equipment
  • 4.1 Equipment is cleaned, maintained and stored or stowed in accordance with manufacturer specifications and workplace procedures to ensure operational effectiveness
  • 4.2 Documentation is completed in accordance with workplace procedures and journey requirements
No information
No information
Replaces
State Code National Code Title Type
D5141 TLIF3060A Control traffic as a pilot vehicle operator Unit of competency