Unit of competency Outline

Date retreived
22/07/2026 5:26 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply airbrushed make-up

Apply airbrushed make-up

Unit of competency
National Code
SHBBMUP005
State Code
AVG50
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/09/2015
View on TGA
State Implementation and Classification
Approved Date
29/01/2016
Field of Education
110301 - Beauty Therapy
Original Release Date
29/01/2016
Nominal Hours
25
Description
This unit describes the performance outcomes, skills and knowledge required to apply airbrushed make-up for face or body.It requires the ability to prepare the work area, consult with clients, select make-up products and equipment, and apply airbrushed make-up.This unit applies to beauticians and make-up artists who work in beauty salons and make-up studios and as freelancers. In this environment they may work as part of a team or autonomously. They have knowledge and skills across a range of airbrush make-up products, application techniques, and airbrush equipment.No occupational licensing, certification and specific legislative or certificate requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Establish make-up requirements.
  • 1.1 Confirm make-up requirements with client.
  • 1.2 Identify contraindications and refer client to appropriate professional as required.
  • 1.3 Cleanse face or body to remove make-up as required.
  • 1.4 Identify skin type, condition, colour, tone and undertone to select airbrush foundation.
2. Design make-up plan.
  • 2.1 Design airbrush make-up plan.
  • 2.1 Confirm make-up plan with client.
  • 2.2 Select make-up products and additional equipment.
3. Apply airbrushed make-up.
  • 3.1 Prepare service area, equipment and self.
  • 3.2 Set compressor and test airbrush flow and pressure prior to make-up application.
  • 3.3 Airbrush foundation with circular movements for complete and even skin coverage.
  • 3.4 Apply highlighting and shading to required facial areas and use stencils and make-up shields as needed.
  • 3.5 Adjust distance, pressure, and airbrushing movements throughout make-up application.
  • 3.6 Seek client feedback to evaluate make-up application and adjust as required.
  • 3.7 Apply setting powder or finishing products, allowing sufficient time for make-up to set.
4. Provide post service advice.
  • 4.1 Provide advice on make-up products and techniques for application, to maintain make-up.
  • 4.2 Provide advice for make-up removal and recommend make-up removal products.
5. Clean service area.
  • 5.1 Clean surfaces and airbrush equipment following manufacturer instructions.
  • 5.2 Replenish service area as required.
  • 5.3 Dispose of general waste to minimise negative environmental impacts.
No information
No information
Replaced By
State Code National Code Title Type
ODR13 SHBBMUP012 Apply airbrushed make-up Unit of competency
State Code National Code Title Type
AWP0 SHB30215 Certificate III in Make-Up Qualification
BGS2 CUA41220 Certificate IV in Screen and Media Qualification