Unit of competency Outline
Date retreived
23/07/2026 10:12 AM AWST
23/07/2026 10:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply techniques to produce prints
Apply techniques to produce prints
Unit of competency
National Code
CUVVSP44B
CUVVSP44B
State Code
D1761
D1761
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
18/09/2008
Field of Education
100301 - Fine Arts
Original Release Date
18/09/2008
Nominal Hours
40
Description
This unit describes the skills and knowledge required to use techniques, materials and equipment for the production of prints. As such the unit covers general knowledge and the application of basic techniques, which would generally be nominated by the supervisor. It is a specialisation unit and refers to a specific art form. This work would usually be carried out under supervision.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
Notes
Elements and Performance Criteria
1 Prepare and maintain physical resources for the production of prints.
- 1.1 Correctly identify and select tools, equipment and materials required for the production of prints.1.2 Prepare, clean and maintain tools, equipment and materials in accordance with relevant workplace procedures and safety requirements. 1.3 Organiseand maintain work space so that it remains clean and safe.
- 1.4 Store tools, equipment and materials in accordance with relevant workplace procedures and safety requirements.
2 Use and test printmaking techniques.
- 2.1 Safely use techniques for the production of prints.2.2 Use and test nominated techniques to determine the capability of the technique and its application.
3 Produce the prints.
- 3.1 Drawconcept for the proposed prints based on own ideas or supplied information.3.2 Correctly identify the steps and resources required to produce the proposed prints.3.3 Select appropriate tools, equipment and materials for the specific prints.3.4 Calculate correct quantities of materials required and minimise waste where possible.3.5 Use techniques, tools and materials safely to produce the final prints.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Tools may include:
brushes
burnishers
carving tools
engraving tools
knives
scissors
scrapers.
Equipment may include:
barens
blankets
presses
protective clothing
rollers
screens
squeegees.
Materials may include:
inks (oil, water based)
pigments
printing surfaces, e.g. papers, fabric
water colours.
Prints may be:
editions
series
unique states.
Workplace procedures may relate to:
cost control
process-specific procedures
recycling
reporting
safety
use of materials.
Organisation and maintenance of the work space may relate to:
bench space organisation
lighting
process specific requirements
ventilation
wet and dry areas.
Within this unit the range of techniques used would generally be quite limited in nature and may include:
monotype printing
relief printing (lino, woodblock)
silkscreen printing
stamping, e.g. potato.
Testing techniques may include:
experimenting directly with work in progress
exploring techniques by making practice pieces
making samples applying nominated techniques.
Drawing may include:
drawing onto transfer paper
drawings on paper
drawings or markings directly onto printing block or screen
electronic imaging.
The concept for the proposed prints may be influenced by:
elements and principles of design
the subject matter or theme for the work, e.g. the body; identity; land and place; political, cultural, social issues; spiritual concerns.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Tools may include:
brushes
burnishers
carving tools
engraving tools
knives
scissors
scrapers.
Equipment may include:
barens
blankets
presses
protective clothing
rollers
screens
squeegees.
Materials may include:
inks (oil, water based)
pigments
printing surfaces, e.g. papers, fabric
water colours.
Prints may be:
editions
series
unique states.
Workplace procedures may relate to:
cost control
process-specific procedures
recycling
reporting
safety
use of materials.
Organisation and maintenance of the work space may relate to:
bench space organisation
lighting
process specific requirements
ventilation
wet and dry areas.
Within this unit the range of techniques used would generally be quite limited in nature and may include:
monotype printing
relief printing (lino, woodblock)
silkscreen printing
stamping, e.g. potato.
Testing techniques may include:
experimenting directly with work in progress
exploring techniques by making practice pieces
making samples applying nominated techniques.
Drawing may include:
drawing onto transfer paper
drawings on paper
drawings or markings directly onto printing block or screen
electronic imaging.
The concept for the proposed prints may be influenced by:
elements and principles of design
the subject matter or theme for the work, e.g. the body; identity; land and place; political, cultural, social issues; spiritual concerns.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit in this unit
The following evidence is critical to the judgement of competence in this unit:
production of prints which demonstrates a command of nominated techniques and which reflects the concept
general knowledge of tools, materials and equipment used in printmaking.
Context of and specific resources for assessment
The assessment context must provide for:
evaluation of visual language and technical execution of work pieces produced by the candidate
practical demonstration of skills using required tools, equipment and materials to produce a minimum of one print.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of work in progress
questioning and discussion of candidate's intentions and work outcomes
written or verbal reports
review of portfolios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Assessment of this unit requires access to the materials, resources and equipment needed to produce prints.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit in this unit
The following evidence is critical to the judgement of competence in this unit:
production of prints which demonstrates a command of nominated techniques and which reflects the concept
general knowledge of tools, materials and equipment used in printmaking.
Context of and specific resources for assessment
The assessment context must provide for:
evaluation of visual language and technical execution of work pieces produced by the candidate
practical demonstration of skills using required tools, equipment and materials to produce a minimum of one print.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
direct observation of work in progress
questioning and discussion of candidate's intentions and work outcomes
written or verbal reports
review of portfolios of evidence
third party workplace reports of performance by the candidate.
Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Assessment of this unit requires access to the materials, resources and equipment needed to produce prints.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C6563 | CUVVSP44A | Apply techniques to produce prints | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7732 | CUVPRI201A | Develop printmaking skills | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C611 | CUV20203 | Certificate II in Aboriginal or Torres Strait Islander Cultural Arts | Qualification |
| C617 | CUV30303 | Certificate III in Design Fundamentals | Qualification |
| C623 | CUV20103 | Certificate II in Visual Arts and Contemporary Craft | Qualification |