Unit of competency Outline

Information current as of
21/10/2026 2:04 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manufacture and modify vehicle plant, tools, equipment and systems

Manufacture and modify vehicle plant, tools, equipment and systems

Unit of competency
National Code
AUMATK010
State Code
WH918
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
40
Field of Education
030705 - Toolmaking
Description
This unit describes the performance outcomes required to manufacture or modify plant, tools, equipment and systems used in the design, development and production of motor vehicles.It applies to those in an automotive manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Plan the job
  • 1.1 Instructions and plans are interpreted to identify required processes and materials
  • 1.2 Requirements for the manufacture or modification are confirmed with engineering personnel
  • 1.3 Fabrication and machining processes and instructions are determined and clarified with relevant personnel
  • 1.4 Work plan, timelines and list of required resources are developed and communicated to relevant personnel
2. Produce parts for plant and equipment
  • 2.1 Specifications for parts are used to determine dimensions and processes for manufacture or modification
  • 2.2 Materials, tools, equipment and assembly or fabrication jigs or fixtures are selected and prepared to specification
  • 2.3 Components or parts are manufactured or modified according to specifications and workplace procedures
3. Modify tools, jigs and fixtures
  • 3.1 Specifications for modifications of tools, jigs or fixtures are used to determine the dimensions and processes
  • 3.2 Materials, tools, equipment and assembly or fabrication jigs are selected and prepared
  • 3.3 Modifications are conducted according to specifications and workplace procedures
4. Fabricate or modify plant and equipment
  • 4.1 Specifications for manufactured or modified plant, tool, equipment or system are interpreted
  • 4.2 Materials, parts, sub-assemblies, tools, equipment and assembly or fabrication jigs are selected and prepared
  • 4.3 Plant, tools and equipment are fabricated, machined and assembled according to workplace procedures
5. Check and test parts
  • 5.1 Test equipment and rigs are used to confirm serviceability of manufactured or modified plant, tools and equipment
  • 5.2Completed plant, tools and equipment are tagged, sealed or packaged, and dispatched to store or production area
6. Complete workplace documentation
  • 6.1 Manufacturing details or modifications to the plant, tools and equipment are documented according to workplace procedures
  • 6.2 Documentation is stored and distributed according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification