Unit of competency Outline

Date retreived
22/07/2026 10:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Process thin glass by hand

Process thin glass by hand

Unit of competency
National Code
MSFGG2004
State Code
WI476
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040323 - Glazing
Original Release Date
19/06/2014
Nominal Hours
64
Description
This unit of competency covers cutting, shaping and applying finishing techniques to annealed glass up to, and including, 10 mm thick, and laminated glass up to, and including, 11.76 mm thick. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify work requirements
  • 1.1 Work requirements, including materials, types of cuts, shapes, holes and edges, processes and quantities required, are identified from work instructions or job order in accordance with workplace procedures
  • 1.2 Work health and safety (WHS) requirements, including personal protective equipment, are observed throughout the work
  • 1.3 Tools, equipment and thin glass materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
  • 1.4 Cutting list and quality standards are determined and procedures identified in accordance with workplace requirements and industry standards
  • 1.5 Glass to be cut, and holes drilled or shaped by hand are selected using information from the work order, including type of glass, thickness, colour and dimensions
  • 1.6 Equipment and settings required to perform the work are identified and prepared
2 Prepare for work
  • 2.1 Sequence of work is planned to ensure processing is conducted in a logical order
  • 2.2 Suitable cutting, shaping and lubrication methods are selected
  • 2.3 Glass processing table is selected and work surface is cleared of debris and dust
  • 2.4 Work area is cleared of obstructions and potential hazards with cullet bins located close to work area
  • 2.5 Glass is checked for imperfections and damage prior to handling
  • 2.6 Glass to be processed is located in the work area using correct manual handling procedures
  • 2.7 Glass is measured accurately to minimise waste and within specified tolerances according to enterprise standards
3 Process glass
  • 3.1 Tools and equipment are operated and monitored in accordance with manufacturer instructions and workplace procedures to ensure correct product quality and output
  • 3.2 Glass is processed to required standard in accordance with job order, work instructions and procedures, including the performance of routine lubrication and adjustments of tools/equipment
  • 3.3 Problems occurring during work operations are identified and reported to appropriate persons
  • 3.4 Authorised changes in working procedures are followed
  • 3.5 Completed product is inspected for quality of work and repaired, reprocessed or discarded in accordance with workplace procedures
4 Complete work
  • 4.1 Processed glass is labelled and stored following workplace procedures ensuring there are no projections
  • 4.2 Scraps and off-cuts are removed for disposal or recycling, as required
  • 4.3 Work area is cleaned and rubbish disposed of, as appropriate
  • 4.4 Workplace documentation is completed, as required
  • 4.5 Tools, equipment and unused materials are removed and stored appropriately
No information
No information
Replaces
State Code National Code Title Type
S7810 LMFGG2004C Process thin glass by hand Unit of competency
Replaced By
State Code National Code Title Type
OAJ22 MSFGG2014 Cut thin glass by hand Unit of competency
State Code National Code Title Type
J728 MSF20413 Certificate II in Glass and Glazing Qualification
J732 MSF30413 Certificate III in Glass and Glazing Qualification