Unit of competency Outline

Date retreived
23/07/2026 5:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce veterinary dental oral cavity images

Produce veterinary dental oral cavity images

Unit of competency
National Code
ACMVET503
State Code
OAL02
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/12/2018
State Implementation and Classification
Approved Date
29/05/2019
Field of Education
061103 - Veterinary Assisting
Original Release Date
29/05/2019
Nominal Hours
25
Description
This unit of competency describes the skills and knowledge required to prepare and monitor patients during imaging procedures, preparing imaging equipment, developing images and recording and storing image results for advanced veterinary dental surgery cases.The unit applies to veterinary nurses who work under the supervision of a registered veterinarian who is at a minimum a Member of the Veterinary Dental Chapter, Australia and New Zealand College of Veterinary Scientists (ANZCVS). Veterinary nurses who work in this role have extensive vocational experience and are responsible for nursing skills and support for veterinarians who perform advanced veterinary dentistry procedures. This unit applies to veterinary nurses who are responsible producing dental cavity images.Legislative and regulatory requirements apply to veterinary nurses but vary according to state/territory jurisdictions. Users must check with the relevant regulatory authority before delivery.NOTE: The terms 'occupational health and safety' (OHS) and 'work health and safety' (WHS) generally have the same meaning in the workplace. In jurisdictions where the national model WHS legislation has not been implemented, RTOs must contextualise the unit of competency by referring to current OHS legislative requirements.
Notes
Elements and Performance Criteria
1. Prepare and monitor patient during imaging procedure
  • 1.1 Apply specific sedation and anaesthetic procedures according to safe imaging procedures and WHS standard
  • 1.2 Determine appropriate imaging technique in consultation with veterinarian
  • 1.3 Position patient film or cassette to suit patient needs
  • 1.4 Monitor patient vital signs during anaesthesia and recovery and record observations using industry standard terminology
  • 1.5 Recognise, respond to and assist with emergencies related to dental imaging procedures
2. Prepare imaging equipment
  • 2.1 Prepare digital, manual, automatic processor or chair side darkroom
  • 2.2 Prepare pre-packed dental films or cassettes
  • 2.3 Position radiographic machine and set for required procedure
  • 2.4 Ensure all involved staff prepare and wear personal protective equipment to comply with radiation hazard procedures
3. Develop diagnostic images
  • 3.1 Develop and display exposed film, or digital image for examination
  • 3.2 Dispose of waste generated from the imaging process (including sedation chemicals) according to waste management protocols
4. Record and store diagnostic image results
  • 4.1 Record results using industry standard terminology
  • 4.2 Store films in a cool, dry place away from ionising radiation and light
No information
No information
Replaces
State Code National Code Title Type
D3953 ACMVET503A Produce veterinary dental oral cavity radiographs Unit of competency
State Code National Code Title Type
BER8 ACM50219 Diploma of Veterinary Nursing Qualification