Unit of competency Outline

Date retreived
22/07/2026 9:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service electric power assist bicycles

Service electric power assist bicycles

Unit of competency
National Code
AURB318301A
State Code
D7578
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
26/09/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
26/09/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to perform routine maintenance on electric power assisted bicycle systems and components.It requires the ability to identify maintenance requirements, interpret manufacturer's instructions and specifications, service the additional electric bicycle components, and test the bicycle for safe and efficient operation.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to maintain bicycle
  • 1.1. Confirm customer requirements and gain approval for work in accordance with workplace procedures
  • 1.2. Identify and source technical information and specifications
  • 1.3. Check tooling and equipment for availability, conformity with specifications and safe condition
  • 1.4. Prepare work area and set up equipment and materials
2. Perform maintenance on bicycle
  • 2.1. Inspect bicycle for faults and worn or damaged components using visual, aural and tactile inspections, and measurements
  • 2.2. Check electrical components, battery condition and motor connectors at plug located on rear stay or front fork
  • 2.3. Compare conditions found with bicycle specifications and customer requirements
  • 2.4. Document any components needing repair additional to routine maintenance, and report to appropriate person or notify customer in accordance with workplace procedures
  • 2.5. Plan maintenance sequence, including post-maintenance testing and checking process
  • 2.6. Select and use tooling and equipment in accordance with occupational health and safety (OHS) requirements
  • 2.7. Perform maintenance operations according to plan and without damage to bicycle components or equipment
  • 2.8. Replace non-serviceable and broken parts in accordance with workplace procedures
  • 2.9. Check bicycle operation in accordance with workplace procedures
3. Prepare bicycle for return to customer
  • 3.1. Clean and prepare bicycle for delivery to customer
  • 3.2. Clean and store portable tooling and equipment in approved designated areas
  • 3.3. Complete workplace records, customer file and warranty information as required by enterprise
  • 3.4. Clean up work area and dispose of waste materials in accordance with workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
WF062 AURBTR3001 Service electric power assist bicycles Unit of competency
No information