Unit of competency Outline

Date retreived
22/07/2026 10:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install video surveillance systems and equipment

Install video surveillance systems and equipment

Unit of competency
National Code
CPPSEC2023
State Code
OBJ04
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/07/2020
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
099905 - Security Services
Original Release Date
20/05/2020
Nominal Hours
20
Description
This unit specifies the skills and knowledge required to install a range of video surveillance systems (VSS) and equipment. VSS is a surveillance system capable of capturing images and videos that can be compressed, stored or sent over communications networks, and includes closed circuit television (CCTV) and audio systems. The unit includes selecting and using materials, tools and equipment to install VSS and equipment using approved cable termination methods and procedures. This work applies to extra low voltage environments as defined in Australian Standards AS/NZS 62676 series specifically parts AS/NZS 62676.1.1:2020, AS/NZS 62676.1.2:2020 and AS/NZS 62676.4:2020 and involves applying National Construction Code (NCC) requirements to the installation.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Prepare to install VSS and equipment.
  • 1.1 Review work instructions to confirm installation timeframes, client needs, site location and equipment requirements, and clarify issues with relevant persons.
  • 1.2 Review work instructions design methodology, operational requirements and grading of the VSS functionality to comply with AS/NZS 62676 Part 1 and Part 4.
  • 1.3 Review Australian Standards AS/NZS 62676 series and NCC in relation to the regulatory requirements associated with designing and installing VSS and equipment and apply to work instructions.
  • 1.4 Review and follow workplace policies and procedures including work health and safety (WHS) when carrying out work tasks.
  • 1.5 Identify and obtain VSS and equipment to be installed following workplace procedures.
2 Plan and organise installation operation.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required tools and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Select and organise required materials and hardware for product installation suitable to the specific installation surface and installation procedures.
  • 2.4 Inspect installation area to identify and control or report risks and hazards.
3 Conduct installation procedures.
  • 3.1 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
  • 3.2 Select installation position to comply with manufacturers specifications and work instructions.
  • 3.3 Securely fix VSS and equipment and terminate and connect cables ensuring no damage or distortion is caused to the surrounding environment or services.
  • 3.4 Identify problems impacting the installation and obtain approval from relevant persons to vary the installation plan.
  • 3.5 Inspect installed VSS and equipment to confirm correct operation and compliance with standards.
  • 3.6 Check to confirm all terminations are electrically and mechanically sound according to WHS requirements.
4 Complete installation and documentation.
  • 4.1 Notify installation completion to relevant persons.
  • 4.2 Complete installation documentation according to workplace and regulatory requirements.
  • 4.3 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.4 Restore work area to original condition and remove waste caused by installation operation.
No information
No information
Replaces
State Code National Code Title Type
D1398 CPPSEC2023A Install CCTV equipment and system Unit of competency