Unit of competency Outline

Date retreived
23/07/2026 5:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct leaching process

Conduct leaching process

Unit of competency
National Code
RIIPBE306D
State Code
WH552
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to conduct leaching process in Metalliferous mining.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for leaching process
  • 1.1. Access, interpret and apply leaching process documentation and ensure the work activity is compliant
  • 1.2. Obtain, read, interpret, clarify and confirm work requirements
  • 1.3. Communicate with other personnel using approved communication methods
  • 1.4. Select and wear personal protective equipment appropriate for work activities
  • 1.5. Select appropriate type of auxiliary equipment for work activities
  • 1.6. Perform equipment pre-start checks
  • 1.7. Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.8. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • 1.9. Use approved dust suppression and extraction methods
  • 1.10. Ensure area is well ventilated
2. Start-up equipment in sequence
  • 2.1. Carry out start-up procedures and complete start-up checks according to plant configurations and system requirements
  • 2.2. Confirm plant is operational
3. Operate and monitor equipment
  • 3.1. Read, interpret and apply data from equipment indicators to determine leaching efficiency
  • 3.2. Continuously inspect and monitor operations/plant and containment areas
  • 3.3. Adjust equipment to optimise leaching
  • 3.4. Add reagents to achieve operating parameters
  • 3.5. Adjust flows to meet downstream requirements
  • 3.6. Carry out operator level maintenance to maintain condition of equipment
  • 3.7. Complete all required documentation concisely and on time
  • 3.8. Pass on end of shift information to oncoming shift
4. Shutdown in sequence and/or isolate equipment
  • 4.1. Shutdown and/or isolate equipment based on process and safety requirements
  • 4.2. Perform post shutdown and/or isolation checks
5. Conduct housekeeping activities
  • 5.1. Clear work area and dispose of or recycle materials
  • 5.2. Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 5.3. Process records
No information
No information
Replaces
State Code National Code Title Type
WB009 RIIPBE306A Conduct leaching process Unit of competency