Unit of competency Outline

Date retreived
23/07/2026 1:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Pressure test residential and small commercial gas installations

Pressure test residential and small commercial gas installations

Unit of competency
National Code
UEGNSG042
State Code
OEK29
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
09/12/2022
View on TGA
State Implementation and Classification
Approved Date
13/03/2023
Field of Education
040327 - Plumbing
Original Release Date
13/03/2023
Nominal Hours
36
Description
This unit involves the skills and knowledge required to pressure test residential and small commercial gas installations and associated components by a designated gas industry person in accordance with industry standards, regulations and workplace procedures.It includes using tools and testing equipment to pressure test the customer piping system, associated fittings and components, and completing required records and relevant documentation.The application of the skills and knowledge described in this unit may require a licence or permit to practice in the workplace.Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare to pressure test gas installation
  • 1.1 Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood
  • 1.2 Job requirements are obtained and interpreted from plans, specifications and instructions
  • 1.3 Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s, including third parties, to determine and confirm work schedule and respective responsibilities
  • 1.4 Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
  • 1.5 Scope of responsibility under the relevant job requirements, including all work permits and/or relevant notifications, is determined and confirmed to access the services and perform work in accordance with job requirements and workplace procedures
  • 1.6 Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
  • 1.7 Materials, plans, diagrams, drawings and resources required for work are confirmed and obtained in accordance with workplace procedures
2 Carry out pressure test of gas installation
  • 2.1 Workplace safety and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed
  • 2.2 Appropriate materials, tools and equipment are selected and used safely in accordance with manufacturer instructions and workplace procedures
  • 2.3 Pressure test of the gas installation is undertaken using relevant pressure testing equipment in accordance with workplace procedures and regulatory requirements
  • 2.4 Results of pressure test are analysed, and non-compliant installations are disconnected in accordance with workplace procedures, industry standards and regulatory requirements
  • 2.5 Work is completed within agreed timeframe and to industry standards in accordance with job requirements and workplace procedures
  • 2.6 Unplanned events are referred to the relevant person/s for directions in accordance with workplace procedures
3 Complete pressure test and relevant documentation
  • 3.1 Workplace safety risk control measures for work completion are followed
  • 3.2 Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards
  • 3.3 Worksite is cleaned, reinstated and made safe in accordance with workplace procedures
  • 3.4 Tools, equipment and any surplus resources/materials are cleaned, checked and securely stored in accordance with workplace procedures
  • 3.5 Incidents are reported and followed up as required in accordance with workplace procedures
  • 3.6 Relevant person/s is notified of work completion in accordance with workplace procedures
  • 3.7 Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
OAE17 UEGNSG708 Pressure test residential and small commercial gas installations Unit of competency