Unit of competency Outline
Date retreived
22/07/2026 3:21 PM AWST
22/07/2026 3:21 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate four wheel drive vehicle on unsealed roads
Operate four wheel drive vehicle on unsealed roads
Unit of competency
National Code
FWPCOT3325
FWPCOT3325
State Code
ODS32
ODS32
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
21/06/2022
Nominal Hours
35
Description
This unit of competency describes the outcomes required to safely operate a four wheel drive vehicle on unsealed roads.The unit applies to individuals who operate four wheel drive vehicles in a variety of work settings and industry sectors, including forestry, agriculture, construction, tourism and energy.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. Individuals must hold a driver licence or a provisional driver licence prior to commencing this unit of competency.
Notes
Elements and Performance Criteria
1. Prepare for operations
- 1.1 Access, interpret and apply vehicle manufacturer information relevant to operating a four wheel drive vehicle on unsealed roads
- 1.2 Identify the structural and handling differences between a conventional two wheel drive vehicle and a four wheel drive vehicle
- 1.3 Determine type of operation and ensure safe operating conditions
- 1.4 Identify, fit and use suitable personal protective equipment
- 1.5 Perform pre-start checks
- 1.6 Establish and check communication with others, including convoy procedures
- 1.7 Secure loads according to safety, environmental and regulatory requirements
- 1.8 Research weather and topography for a planned trip on unsealed roads
2. Operate vehicle on unsealed roads
- 2.1 Check and change tyre pressure suitable for unsealed road according to workplace procedures
- 2.2 Continually monitor the track to identify hazards, assess risks and select the best route according to safety and environmental requirements
- 2.3 Identify situations where the engagement of four wheel drive is required and engage front hubs or centre differential lock where fitted
- 2.4 Use range, gear, speed, driving and braking technique appropriate to surface conditions while maintaining control of vehicle at all times
- 2.5 Check brake operation and undercarriage after operating vehicle on unsealed road conditions
- 2.6 Park and shut down vehicle
3. Ascend and descend slopes less than 15 degrees
- 3.1 Inspect intended vehicle path before negotiation of slope
- 3.2 Use appropriate range, gear, speed, driving and braking technique to negotiate a slope while maintaining control of vehicle
- 3.3 Use appropriate braking methods, user applied and vehicle controlled function, where fitted, to descend a slope
- 3.4 Maintain traction and minimise wheel spin
- 3.5 Apply appropriate automatic and manual techniques when vehicle cannot proceed any further on a slope
4. Complete operation
- 4.1 Conduct a post-trip inspection of vehicle
- 4.2 Complete post-trip documentation, including maintenance and minor repairs reports
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXL04 | FWPCOT3259 | Operate a four wheel drive on unsealed roads | Unit of competency |