Unit of competency Outline

Date retreived
23/07/2026 12:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and refit driveline components

Remove and refit driveline components

Unit of competency
National Code
AURTTQ002
State Code
AXA34
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
12
Description
This unit describes the performance outcomes required to remove and refit driveline components. It involves preparing for the task, testing, removing, refitting and adjusting driveline components, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The driveline systems include those of light vehicles, four wheel drive (4WD) vehicles, and light commercial vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to test and remove driveline components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Driveline removal, refit and adjustment procedures and information are sourced and interpreted
  • 1.3 Driveline testing procedures are sourced and interpreted from manufacturer specifications
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
2. Test and remove driveline components
  • 2.1 Driveline is tested according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Driveline components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 2.3 Driveline components are inspected for faults according to manufacturer specifications, workplace procedures and safety requirements
  • 2.4 Results of driveline tests are reported according to workplace procedures
3. Refit and adjust driveline components
  • 3.1 Driveline components are examined for serviceability prior to commencing the refitting procedures
  • 3.2 Driveline serviceable components are refitted according to manufacturer specifications, workplace procedures and safety requirements
  • 3.3 Driveline is lubricated and adjusted according to manufacturer specifications, workplace procedures and safety requirements
  • 3.4 Driveline is checked for correct assembly and operation according to manufacturer specifications and workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF438 AURTTQ2002 Remove and refit driveline components Unit of competency