Unit of competency Outline

Date retreived
22/07/2026 6:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate shopfitting components using CNC machines

Fabricate shopfitting components using CNC machines

Unit of competency
National Code
CPCSHP3001
State Code
OCM30
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
01/06/2021
Nominal Hours
55
Description
This unit of competency specifies the skills and knowledge required to program and use computer numerically-controlled (CNC) machines to fabricate components for shopfitting units. It includes inputting correct data into selected software programs and sequencing the fabrication process. It applies to those who fabricate components for a range of shopfitting units in an off-site manufacturing premises ready for installation on commercial sites. Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction.No licensing, legislative or certification requirements apply to this unit of competency at the time of publication.Completion of the general construction induction training program, specified in the Safe Work Australia modelCode of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.
Notes
Elements and Performance Criteria
1 Plan and prepare to use CNC machines.
  • 1.1 Identify, read and interpret details of shopfitting components from job requirements, plans and specifications.
  • 1.2 Produce a full size set out of all shopfitting components and detail fabrication method, joint type, grain direction, and drawer and door clearance.
  • 1.3 Calculate material quantities for fabrication of shopfitting components from dimensions on plans.
  • 1.4 Develop an efficient cutting list to minimise waste.
  • 1.5 Determine job priorities and sequence job tasks in consultation with others in the workplace.
  • 1.6 Identify workplace hazards and conditions, assess risks and implement risk controls following work health and safety requirements and environmental practices.
  • 1.7 Select, fit and used personal protective equipment (PPE) required for the task.
  • 1.8 Obtain, safely handle and prepare materials appropriate to the work application and locate ready for use.
  • 1.9 Check serviceability of CNC machinery, and identify, report and rectify faults.
2 Prepare CNC program.
  • 2.1 Select appropriate CNC machine and software program for the task.
  • 2.2 Define the machine functions and select the appropriate program commands for the machine control system in preparation to perform and save programming operations for the fabrication process.
  • 2.3 Determine and check that programming terms, methods and data storage capacity are consistent with job requirements and machine specifications.
  • 2.4 Identify and select method of transferring programs into machine memory.
  • 2.5 Edit machine specification program, compensating for tool profiles, to produce the required straight and circular tool movements.
3 Transfer and test machine controls.
  • 3.1 Load appropriate program into machine memory using selected method.
  • 3.2 Enter program following machine specifications to fabricate shopfitting components.
  • 3.3 Conduct a dry run simulation to test program operations.
  • 3.4 Recognise minor faults and problems with CNC machine operation, and select and apply appropriate action to overcome issues and meet project schedules.
  • 3.5 Edit program and alarm settings as required using the control station.
4 Fabricate components.
  • 4.1 Follow manufacturer specifications to fabricate components using automatic mode.
  • 4.2 Identity and legibly mark face and edge of each component following design specifications to assist with efficient and accurate assembly.
  • 4.3 Locate and arrange components ready for assembly to align with relevant plans and specifications.
  • 4.4 Store plans, specifications and set-outs for future reference.
5 Clean up.
  • 5.1 Clean CNC machinery, tools and equipment, check for serviceability and report damage or faults.
  • 5.2 Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 5.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
BBA97 CPCCSH3001 Fabricate shopfitting components using CNC machines Unit of competency
State Code National Code Title Type
BGD6 CPC31920 Certificate III in Joinery Qualification
BGD2 CPC30120 Certificate III in Shopfitting Qualification