Unit of competency Outline

Date retreived
22/07/2026 5:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Disassemble and pack a bicycle for transport

Disassemble and pack a bicycle for transport

Unit of competency
National Code
AURBTA108
State Code
ODJ99
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to disassemble and pack a bicycle for transport. It involves the skills and knowledge required to prepare to pack a bicycle for transport, disassemble a bicycle, select appropriate packing material and pack a bicycle for transport following the relevant operating procedures and codes of practice required for the task whilst completing workplace processes and documentation.The unit applies to those working in the bicycle sales and service and repair industry. This unit does not apply to light and heavy vehicle engines.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to pack a bicycle for transport
  • 1.1 Determine job requirement from workplace instructions
  • 1.2 Identify hazards and manage risks associated with packing bicycle for transport
  • 1.3 Analyse and select method to pack bicycle for transit according to manufacturer instructions and workplace procedures
2. Disassemble bicycle
  • 2.1 Source and interpret service information to disassemble bicycle
  • 2.2 Inspect, check and select tools, equipment and materials for serviceability
  • 2.3 Identify hazards and manage risks associated with the work
  • 2.4 Disassemble bicycle according to workplace and manufacturer procedures
3. Pack bicycle for transport
  • 3.1 Carry out packing of bicycle into determined transport container according to workplace procedures
  • 3.2 Inspect transport container and confirm bicycle is secure and seal transport container
  • 3.3 Report condition of transport container and document according to workplace procedures
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
No information