Unit of competency Outline
Information current as of
20/10/2026 5:11 PM AWST
20/10/2026 5:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate a mobile field laundry system
Operate a mobile field laundry system
Unit of competency
National Code
DEFCM301B
DEFCM301B
State Code
AVU81
AVU81
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
Original Release Date
15/03/2012
Nominal Hours
0
Field of Education
030717 - Plant And Machine Operations
Description
This unit covers the competency required to supervise and operate a mobile field laundry system to launder clothing in a field environment.This unit requires a team to load the system onto transport, site and erect the unit, connect ancillary equipment and utility supplies, conduct initial start-up procedures, operate the system, rectify operating faults, conduct routine maintenance and close the system down for transportation and storage.
General notes
N/A
Elements and Performance Criteria
1. Load the mobile field laundry system for transit
- 1.1 Equipment components are aligned and positioned prior to lifting the container system to prevent damage to the laundry system.
- 1.2 Attachments are fitted correctly in accordance with standard procedures.
- 1.3 All mounting points, locks and nuts are physically checked prior to placing any weight on the high lift jacks, in accordance with standard procedures.
- 1.4 Guides are effectively used to assist the driver when manoeuvring the vehicle under the laundry storage container, in accordance with standard procedures.
2. Site and erect the mobile field laundry system
- 2.1 Laundry system is sited on ground that is hard standing, level and clear of debris to prevent fire risk, in accordance with standard procedures.
- 2.2 Tentage and associated shelters and containers are located and erected around the laundry system without hindering access or operation.
- 2.3 Gas supply systems are stored in accordance with standard procedures.
3. Conduct initial start up procedures
- 3.1 Levelling is conducted correctly and at the correct speed to ensure the efficient discharge of waste water and to prevent malfunction, in accordance with standard procedures.
- 3.2 Laundry system is locked into position to ensure additional security to the container.
- 3.3 Water pressure is monitored in accordance with standard procedures
- 3.4 Blow down procedures are implemented whenever pressure exceeds operating parameters.
4. Monitor mobile field laundry system
- 4.1 Container is opened correctly with equipment components locked into position and monitored, in accordance with standard procedures.
- 4.2 Accessories are removed from the container, kept in close proximity and monitored, in accordance with standard procedures.
- 4.3 Hoses and associated connection components are fitted correctly and laid flat to ensure that waste water does not cause a backup of water to the machine or pollution to the environment.
- 4.4 Electrical power is not connected until the laundry system is securely earthed in accordance with standard procedures.
- 4.5 Utilities are maintained and checked periodically to ensure efficient operation of the laundry system.
- 4.6 Wash cycles selected are appropriate to the program and temperature for the laundry requirement.
- 4.7 Remedial actions are undertaken during operational failures or faults, in a timely manner, to reduce damage to the equipment.
- 4.8 Cleaning and care of the machine is conducted and is appropriate to the machinery parts.
5. Conduct maintenance
- 5.1 Daily procedures are conducted to ensure optimum operating efficiency.
- 5.2 Solutions to problems are implemented to enable the unit to remain operational.
- 5.3 Periodic inspections are conducted when the unit is in storage to ensure the unit remains in working condition while in storage.
6. Close down the mobile field laundry system
- 6.1 Utility supplies are refilled (if applicable) after use to maintain operational readiness.
- 6.2 Accessories are drained, disconnected, then dried and folded prior to packaging, transportation and storage, in accordance with operating instructions.
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.
Field environment may include:
disaster relief
operational environment
primitive conditions with little of no infrastructure
providing humanitarian aid
Ancillary equipment may include:
accessories trolley
circulating pumps and systems
drying machines
gas bottles
gas burners
generators
heating systems
stave tanks
water tanks
waste water bladders
washing machines
Transportation may include:
air
rail
road
sea
Equipment components may include:
allen screws and keys
bolts, nuts and studs
ground plates
levelling jacks
twist lock plates
Attachments may include:
accessories trolley
air struts
flues
heater unit
panels
support arms
transit locking bars
Standard procedures may include:
Australian Standards
defence instructions
doctrinal pamphlets
job guides, other publications
manufacturers’ handbooks, industry specifications and technical instructions
work health and safety (WHS) regulations
organisational policies and procedures
procedure manuals
relevant local government bylaws
relevant state or federal legislation
routine orders
standing operating procedures
standing orders
written and verbal orders
Siting requirements may include:
access to water, power and waste water disposal
an area free of debris/fire hazard
consideration of the area around the container
ground that is hardstanding and as level as possible
noise resonance considerations
requirement for additional tentage or camouflage
Tentage may include:
braces
camouflage netting
support tent tubes
tarpaulins
tent poles and spikes
tents (ends and extensions) 20 x 30 or 14 x 14
Gas supply systems may include:
bottled gas
gas burners
hoses
liquefied petroleum gas (LPG)
propane
regulators
town gas supply
Blow down procedures may include:
bleeding water from hoses
circulating water (hot or cold)
isolating and closing valves
monitoring operation
opening drains and filters
reducing water pressure
releasing entrapped air
replacing pumps on failure
Accessories may include:
adapter boxes, pins, valves and cables
basins
baskets
bin packs
brooms
buckets
capacitors
chairs
clamps
earth stakes
electronic controls
first aid kit
gas cylinders, burners, regulators
gloves
hand cleaner
hoses
iron and ironing board
ladders
laundry soap
membranes
mops
power board
pumps
repair kits (cold and hot water)
rollers
spades
tool kits
torches
v belts
wrenches
Utilities may include:
electricity
gas
water
Maintenance checks may include:
bas burners
cartridge filters isolation valves
checks for foreign bodies
cleaning and care
condition and security of fittings
discharge hoses
lighting (fluorescent tubes)
rings
utility supply
water pressure
weekly circulation of water through the system
Remedial actions may include:
blow down procedures
interruption of wash cycles/programs
checking hoses lay flat
checks on burners and pilots
connection checks
crash shut down
operating pressure checks
Cleaning may include:
air drying
cleaning detergent boxes to remove residue
cleaning filters (for lint and fluff)
deodorising
monitoring rush spots
use of detergents (scouring powders, proprietary stainless steel cleaners)
use of warm water
wiping out of machines and drums
Daily procedures may include:
checking connections of hoses
cleaning after use
leaving doors ajar for drying
monitoring burner pilots
monitoring operating pressures
resetting utility supplies
Field environment may include:
disaster relief
operational environment
primitive conditions with little of no infrastructure
providing humanitarian aid
Ancillary equipment may include:
accessories trolley
circulating pumps and systems
drying machines
gas bottles
gas burners
generators
heating systems
stave tanks
water tanks
waste water bladders
washing machines
Transportation may include:
air
rail
road
sea
Equipment components may include:
allen screws and keys
bolts, nuts and studs
ground plates
levelling jacks
twist lock plates
Attachments may include:
accessories trolley
air struts
flues
heater unit
panels
support arms
transit locking bars
Standard procedures may include:
Australian Standards
defence instructions
doctrinal pamphlets
job guides, other publications
manufacturers’ handbooks, industry specifications and technical instructions
work health and safety (WHS) regulations
organisational policies and procedures
procedure manuals
relevant local government bylaws
relevant state or federal legislation
routine orders
standing operating procedures
standing orders
written and verbal orders
Siting requirements may include:
access to water, power and waste water disposal
an area free of debris/fire hazard
consideration of the area around the container
ground that is hardstanding and as level as possible
noise resonance considerations
requirement for additional tentage or camouflage
Tentage may include:
braces
camouflage netting
support tent tubes
tarpaulins
tent poles and spikes
tents (ends and extensions) 20 x 30 or 14 x 14
Gas supply systems may include:
bottled gas
gas burners
hoses
liquefied petroleum gas (LPG)
propane
regulators
town gas supply
Blow down procedures may include:
bleeding water from hoses
circulating water (hot or cold)
isolating and closing valves
monitoring operation
opening drains and filters
reducing water pressure
releasing entrapped air
replacing pumps on failure
Accessories may include:
adapter boxes, pins, valves and cables
basins
baskets
bin packs
brooms
buckets
capacitors
chairs
clamps
earth stakes
electronic controls
first aid kit
gas cylinders, burners, regulators
gloves
hand cleaner
hoses
iron and ironing board
ladders
laundry soap
membranes
mops
power board
pumps
repair kits (cold and hot water)
rollers
spades
tool kits
torches
v belts
wrenches
Utilities may include:
electricity
gas
water
Maintenance checks may include:
bas burners
cartridge filters isolation valves
checks for foreign bodies
cleaning and care
condition and security of fittings
discharge hoses
lighting (fluorescent tubes)
rings
utility supply
water pressure
weekly circulation of water through the system
Remedial actions may include:
blow down procedures
interruption of wash cycles/programs
checking hoses lay flat
checks on burners and pilots
connection checks
crash shut down
operating pressure checks
Cleaning may include:
air drying
cleaning detergent boxes to remove residue
cleaning filters (for lint and fluff)
deodorising
monitoring rush spots
use of detergents (scouring powders, proprietary stainless steel cleaners)
use of warm water
wiping out of machines and drums
Daily procedures may include:
checking connections of hoses
cleaning after use
leaving doors ajar for drying
monitoring burner pilots
monitoring operating pressures
resetting utility supplies
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessment must confirm the ability to work as part of a team in an operational environment, and to site and operate a laundry system with minimal impact on the environment.
Consistency in performance
Competency should be demonstrated over time, in a simulated field environment, to allow the individual to be assessed in a number of realistic scenarios to ensure consistency of performance.
Context of and specific resources for assessment
Context of assessment
Competency should be assessed in the workplace or in a simulated workplace environment.
Specific resources for assessment
Access to mobile field laundry system, complete with accessories and components; suitable vehicle or semi trailer for transportation; field training area; laundry for washing/drying; operator manuals; cleaning materials; camouflage nets and equipment; stationery; tentage; and gas, water and power supply.
Assessment must confirm the ability to work as part of a team in an operational environment, and to site and operate a laundry system with minimal impact on the environment.
Consistency in performance
Competency should be demonstrated over time, in a simulated field environment, to allow the individual to be assessed in a number of realistic scenarios to ensure consistency of performance.
Context of and specific resources for assessment
Context of assessment
Competency should be assessed in the workplace or in a simulated workplace environment.
Specific resources for assessment
Access to mobile field laundry system, complete with accessories and components; suitable vehicle or semi trailer for transportation; field training area; laundry for washing/drying; operator manuals; cleaning materials; camouflage nets and equipment; stationery; tentage; and gas, water and power supply.
No information