Unit of competency Outline

Date retreived
22/07/2026 3:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct crane operations underground

Conduct crane operations underground

Unit of competency
National Code
RIIHAN310D
State Code
WH316
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
3.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
35
Description
This unit describes a participant’s skills and knowledge required to conduct crane operations underground in Coal and Metalliferous mining. This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct crane operations underground
  • 1.1 Access, interpret and apply crane operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Select and wear personal protective equipment appropriate for work activities
  • 1.4 Check indicators and perform pre-start checks on equipment and attachments
  • 1.5 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.6 Carry out start-up procedures
  • 1.7 Communicate with other equipment operators and personnel using approved communication methods
  • 1.8 Scale loose material and make site safe
  • 1.9 Use approved dust suppression and extraction methods
  • 1.10 Ensure area is well ventilated before entry into work area
2. Lift and shift load
  • 2.1 Determine rigging and slinging requirements after assessing site and load conditions
  • 2.2 Determine lifting technique according to the nature of the load being moved and the required location
  • 2.3 Operate equipment within work environment and equipment limitations, using safe driving conventions
  • 2.4 Monitor and manage equipment performance using appropriate indicators/gauges
  • 2.5 Assess ground conditions, position equipment ensure stability of crane and safety of other equipment and personnel
  • 2.6 Complete all written documentation clearly, concisely and on time
  • 2.7 Pass on written or verbal end of shift information to oncoming shift
3. Carry out operator maintenance
  • 3.1 Carry out shutdown procedures
  • 3.2 Service and make minor adjustments to equipment
  • 3.3 Visually inspect equipment, report faults in writing or verbally, and make equipment available for routine operational servicing
4. Conduct housekeeping activities
  • 4.1 Clean equipment and work area
  • 4.2 Clean and store ancillary service equipment
No information
No information
Replaces
State Code National Code Title Type
WB286 RIIHAN310A Conduct crane operations underground Unit of competency
Replaced By
State Code National Code Title Type
OAK79 RIIHAN310E Conduct crane operations underground Unit of competency
State Code National Code Title Type
AZD9 RII30315 Certificate III in Underground Metalliferous Mining Qualification