Unit of competency Outline

Date retreived
22/07/2026 8:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor the quality of test results and data

Monitor the quality of test results and data

Unit of competency
National Code
MSL935001
State Code
AWO45
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
080317 - Quality Management
Original Release Date
16/08/2016
Nominal Hours
120
Description
This unit of competency covers the ability to analyse a series of test results and data to detect potential or actual non-conformances, assess their significance and recommend preventative or corrective actions. The unit assumes personnel will have access to workplace quality assurance procedures based on Australian and/or international standards. This unit of competency does not cover the adaptation or development of test methods or procedures.This unit of competency is applicable to technical officers, technical specialists and laboratory supervisors in all industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked
Notes
Elements and Performance Criteria
1 Verify accuracy of data and technical records
  • 1.1 Retrieve and collate all relevant data files and technical records for the specified time interval, tests or product range or project
  • 1.2 Inspect data records to check the integrity of data entry, alterations, transfers and calculations
  • 1.3 Confirm that technical records contain sufficient information to provide an audit trail for the tests involved
2 Assess the quality of data/results
  • 2.1 Use charts and tables to determine whether data/results are within specified limits
  • 2.2 Analyse data trends and results for blanks, duplicates and/or check samples to detect systematic uncertainties
  • 2.3 Use statistical tests and workplace procedures to check data acceptability
  • 2.4 Check that estimations of uncertainties are reasonable and consistent with test method, client or product specification requirements
  • 2.5 Identify results that cannot be reconciled with technical records and/or expected outcomes
3 Identify potential causes for unacceptable results
  • 3.1 Review user checks and calibration performance records to confirm that equipment or instrument meets test specifications
  • 3.2 Check for obvious sources of interferences that may have occurred during measurements
  • 3.3 Review technical records to identify human or environmental factors that could affect reliability of results
  • 3.4 Review records of sample collection and preparation to confirm chain of custody requirements and adherence to sampling procedures
  • 3.5 Check that any documented deviations from sampling procedures and/or test methods were technically justified and authorised
  • 3.6 Check the condition of sampling equipment and/or stored samples if available/appropriate
4 Report findings to relevant personnel
  • 4.1 Summarise the quality of test results and data
  • 4.2 Document potential sources or instances of non-conforming work and assess their significance
  • 4.3 Recommend appropriate preventative/corrective actions to improve sampling, testing and/or calibration activities
  • 4.4 Prepare reports in a format and style consistent with their intended use and workplace guidelines
No information
No information
Replaces
State Code National Code Title Type
WA682 MSL935001A Monitor the quality of test results and data Unit of competency
Replaced By
State Code National Code Title Type
OAC90 MSL935007 Monitor the quality of test results and data Unit of competency