Unit of competency Outline
Date retreived
22/07/2026 8:08 PM AWST
22/07/2026 8:08 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Cut mattress and base fabrics
Cut mattress and base fabrics
Unit of competency
National Code
LMFMB2004B
LMFMB2004B
State Code
W8701
W8701
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/09/2008
Nominal Hours
40
Description
This unit covers the competency to lay out patterns and cut fabrics ready for construction of mattresses and bases.
Notes
Elements and Performance Criteria
1. Plan work operations
- 1.1. Specification sizes are read and interpreted to identify required fabrics, number of items to be cut and required equipment
- 1.2. Cutting requirements or other instructions are noted and required guides on the cutting table are identified
- 1.3. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.4. Suitable work area is selected, tidied and cleaned of any contaminants
- 1.5. Appropriate equipment and tools are selected for the fabrics and type of materials
- 1.6. Scissors and any other cutting equipment appropriate for the fabric are selected and checked prior to use for sharpness, set operation and safe condition
2. Prepare materials for cutting
- 2.1. Fabrics are selected to suit application, inspected for flaws and appropriate finish
- 2.2. Naps, direction of pattern, pattern repeat and finished side of the materials are identified
- 2.3. Fabrics are laid out smooth and square ready for cutting
- 2.4. Patterns are laid out following work procedures and instructions using location marks on the pattern and other instructions to match specifications
- 2.5. Measurements are made and appropriate adjustments are made
- 2.6. Tools and equipment are checked for operation
3. Complete cutting operations
- 3.1. Required cutting operations are completed to cut out materials following work instructions
- 3.2. Cut fabrics are folded, protected and despatched to next process following workplace procedures
- 3.3. Unused materials are stored as required
- 3.4. Workplace required documentation is completed and stored following appropriate procedures
- 3.5. Work area is cleaned and damaged tools tagged as required
- 3.6. Waste is collected and bundled for recycling/reuse as required
- 3.7. Tools and equipment are cleaned, maintained and returned to storage area
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving cutting single or multi layer fabrics by hand or automatic method according to specifications and pattern
This unit applies to fabrics and where matching involves naps, direction of pattern and pattern repeats
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and safe operating procedures or equivalent
Work is carried out in accordance with statutory requirements, organisation insurance requirements, environmental legislation, manual handling procedures and relevant health regulations
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the cutting of material. This may be demonstrated either individually or in a team environment
Tools and equipment may include, but are not limited to:
scissors
cutting blades
fabric cutter
Materials to be cut may include but are not limited to:
plain and patterned fabric
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices
Information and procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, patterns, drawings and designs
Workplace procedures relating to reporting and communication
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit covers work involving cutting single or multi layer fabrics by hand or automatic method according to specifications and pattern
This unit applies to fabrics and where matching involves naps, direction of pattern and pattern repeats
Unit context
OHS requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and safe operating procedures or equivalent
Work is carried out in accordance with statutory requirements, organisation insurance requirements, environmental legislation, manual handling procedures and relevant health regulations
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the cutting of material. This may be demonstrated either individually or in a team environment
Tools and equipment may include, but are not limited to:
scissors
cutting blades
fabric cutter
Materials to be cut may include but are not limited to:
plain and patterned fabric
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices
Information and procedures
Workplace procedures relating to the setting and operation of machinery
Work instructions, including job sheets, patterns, drawings and designs
Workplace procedures relating to reporting and communication
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling practices for equipment, products and materials
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify materials used and any special cutting requirements
Measure accurately and cut fabrics to required size and accuracy covering at least three different fabric types or pattern styles
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate fabric cutters, scissors and tools, fabrics, work order, workplace information, including work procedures and equipment instructions.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling practices for equipment, products and materials
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify materials used and any special cutting requirements
Measure accurately and cut fabrics to required size and accuracy covering at least three different fabric types or pattern styles
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate fabric cutters, scissors and tools, fabrics, work order, workplace information, including work procedures and equipment instructions.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0345 | LMFMB2004A | Cut mattress and base fabrics | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI574 | MSFMB2003 | Cut mattress and base fabrics | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W035 | LMF30702 | Certificate III in Mattress and Base Making | Qualification |
| W025 | LMF20502 | Certificate II in Mattress and Base Making | Qualification |