Unit of competency Outline

Date retreived
22/07/2026 1:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Automatically produce complex screen prints

Automatically produce complex screen prints

Unit of competency
National Code
ICPSCP375
State Code
AUN57
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce complex screen prints of two or more colours using automatic printing machines.It applies to individuals working in the printing and graphic arts industry who may have to set up and operate power-driven or hand-operated screen printing machines. They may have to provide leadership and guidance to others and have some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Load substrate
  • 1.1 Substrate is checked against job specifications with any irregularities reported and rectified where possible
  • 1.2 Substrate position and stencil registration are adjusted according to job specifications
2 Apply ink to screen
  • 2.1 Ink is applied to screen in quantity required for screen size
  • 2.2 Equipment is kept clean and spills are minimised
  • 2.3 Colour is mixed and ink is checked against job specifications
  • 2.4 Feeder is set and adjusted to suit substrate
3 Produce proof print
  • 3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications
  • 3.2 Adjustments are made according to product and machine specifications
  • 3.3 Appropriate approval to commence production is sought prior to commencement
  • 3.4 Belt speed and energy required are set to achieve desired properties and printing speeds are adjusted to suit
4 Run job and monitor print quality
  • 4.1 Printing speed production is adjusted to maximise quality and output
  • 4.2 Print quality is continuously evaluated and adjusted as required
  • 4.3 Effects of ink alterations during run are monitored and appropriate action taken according to manufacturer or supplier and job specifications
  • 4.4 Workplace documentation is completed as required
  • 4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications
5 Carry out routine user maintenance
  • 5.1 Equipment is lubricated, cleaned and adjusted according to manufacturer or supplier specifications
  • 5.2 Faults are identified and reported according to enterprise procedures
6 Handle production output
  • 6.1 Output is checked for thorough drying or curing before stacking
  • 6.2 Job status and progress are checked against job specifications and any necessary action is taken
7 Shut down machine
  • 7.1 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications
  • 7.2 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures
  • 7.3 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3235 ICPSP375C Automatically produce complex screen prints Unit of competency
No information