Unit of competency Outline

Date retreived
22/07/2026 1:18 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate extrusion equipment

Operate extrusion equipment

Unit of competency
National Code
PMC552031
State Code
BAH59
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to operate extrusion equipment and ancillary equipment that is integral to the process. It applies to a large production context where the extrusion is used to form clay, ceramic or concrete products.This unit of competency applies to operators who are required to prepare materials and equipment, monitor and adjust the equipment and rectify routine problems. This unit of competency does not apply to presses or back stamping, slip forming or manual forming. This unit does not require the operation of a central control panel.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare the extrusion equipment
  • 1.1 Determine the product formation requirements from the production program
  • 1.2 Ensure the required change parts are in place
  • 1.3 Ensure the required raw materials are selected and loaded or connected to the equipment
  • 1.4 Ensure the equipment is safe to use
2 Operate forming equipment
  • 2.1 Ensure correct vacuum is applied to raw material
  • 2.2 Operate equipment to produce product of the required shape, dimensions and consistency
  • 2.3 Monitor equipment conditions and adjust as required
  • 2.4 Monitor and adjust product properties as required
  • 2.5 Record production data as required
3 Operate surface finishing equipment
  • 3.1 Operate surface patterning equipment as required
  • 3.2 Operate frit application and similar equipment as required
  • 3.3 Monitor operations and adjust/refill as required
  • 3.4 Apply glazing material as required
4 Unload and shut down extrusion equipment
  • 4.1 Unload and shut down extrusion equipment at conclusion of the production run to requirements
  • 4.2 Clean up work area and perform housekeeping duties
  • 4.3 Store materials appropriately
5 Rectify routine problems
  • 5.1 Identify the range of faults that can occur during the operation
  • 5.2 Determine and rectify fault causes in accordance with procedures/work instructions
  • 5.3 Identify and rectify equipment failure causes in accordance with procedures/work instructions
  • 5.4 Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions
  • 5.5 Identify non-routine problems and report to designated person
6 Control hazards
  • 6.1 Identify hazards in extruder work area
  • 6.2 Assess the risks arising from those hazards
  • 6.3 Implement measures to control those risks in line with procedures and duty of care
No information
No information
Replaces
State Code National Code Title Type
WA924 PMC552031C Operate extrusion equipment Unit of competency