Unit of competency Outline

Date retreived
22/07/2026 3:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and overhaul bicycle drivetrain systems

Repair and overhaul bicycle drivetrain systems

Unit of competency
National Code
AURBTQ002
State Code
AXE36
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair bicycle drivetrain systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, repairing and testing the bicycle drivetrain system according to manufacturer specifications, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair bicycle drivetrain system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
  • 1.3 Condition of bicycle drivetrain system is inspected using visual and physical methods and compared with manufacturer specifications
  • 1.4 Repair options and techniques are identified and confirmed with customer
  • 1.5 Replacement parts for drivetrain are identified and sourced as required
  • 1.6 Hazards associated with the work are identified and risks are managed
  • 1.7 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.8 Work area is prepared and repair process, including post-repair testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out repairs to drivetrain system
  • 2.1 Bicycle drivetrain system is repaired according to job requirements, manufacturer specifications, and safety and environmental requirements
  • 2.2 Required replacement parts are checked and fitted according to manufacturer specifications
  • 2.3 Operation of repaired drivetrain system is tested and adjusted as required according to manufacturer specifications and workplace procedures
  • 2.4 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF061 AURBTQ3002 Repair bicycle drivetrain systems Unit of competency