Unit of competency Outline

Date retreived
22/07/2026 4:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and produce hand-collated or inserted product

Set up and produce hand-collated or inserted product

Unit of competency
National Code
ICPCBF245
State Code
AUO63
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to hand-collate or insert product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job related components is checked
  • 1.4 Collating/inserting system is set up according to job specifications
2. Conduct sample run
  • 2.1 Material to be used for sample is organised correctly
  • 2.2 Collating or inserting system is operated to produce a specified sample according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
3. Organise sample inspection and/or testing
  • 3.1.Sample is visually inspected and/or tested, or laboratory testing is organised, according to enterprise procedures
  • 3.2 Results are interpreted to determine adjustment requirements
  • 3.3 Adjustments are carried out according to product specifications
4. Maintain production process
  • 4.1 Hand-collating process is monitored and adjusted to ensure product quality meets the approved sample standard
  • 4.2 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 4.3 Production is maintained according to WHS requirements, manufacturer’s specifications and enterprise procedures
  • 4.4 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 4.5 Process adjustments to eliminate problems are reported according to enterprise procedures
5. Clean work area at end of run
  • 5.1 Collating area is cleaned ready for next run
  • 5.2 Waste is sorted according to enterprise procedures
  • 5.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 5.4 Production records or other documentation are accurately completed, where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3033 ICPCF245C Set up and produce hand-collated or -inserted product Unit of competency
Replaced By
State Code National Code Title Type
OBP39 ICPCBF2450 Set up and produce hand-collated or inserted product Unit of competency
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification