Unit of competency Outline

Date retreived
22/07/2026 3:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate roller/compactor

Operate roller/compactor

Unit of competency
National Code
RIIMPO205E
State Code
OAK75
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
11/12/2018
View on TGA
State Implementation and Classification
Approved Date
27/03/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
27/03/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to operate roller/compactors to perform compaction activities. This unit applies to those working in site-based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for roller/compactor operations
  • 1.1 Access, interpret and apply mobile plant and equipment documentation
  • 1.2 Obtain, interpret, clarify and confirm work requirements
  • 1.3 Identify hazards and environmental issues, assess the risks and implement control measures in line with workplace policies
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Select required roller/compactor equipment and confirm suitability for work activities
  • 1.6 Obtain and interpret emergency procedures, and be prepared for fires, accidents and emergencies
  • 1.7 Coordinate and communicate planned activities with others at the site prior to commencement of work activity
2. Operate roller/compactor in line with established requirements
  • 2.1 Carry out prestart and start-up checks in line with workplace procedures
  • 2.2 Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures
  • 2.3 Drive and operate equipment using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures
  • 2.4 Engage and disengage the compacting device in line with workplace procedures
  • 2.5 Identify, remove or manage contaminants in line with workplace procedures
  • 2.6 Compact to degree of compaction in line with work requirements
  • 2.7 Monitor and manage equipment performance using appropriate indicators, and ensure efficiency of operations
  • 2.8 Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment
  • 2.9 Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures
3. Conduct housekeeping activities
  • 3.1 Clear work area and dispose or recycle materials according to workplace procedures
  • 3.2 Manage/report hazards, and maintain a safe working environment
  • 3.3 Complete and file or distribute documentation in a manner that complies with workplace practices
No information
No information
Replaces
State Code National Code Title Type
WH403 RIIMPO205D Operate roller/compactor Unit of competency