Unit of competency Outline

Date retreived
23/07/2026 5:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply metal to rebuild engine components

Apply metal to rebuild engine components

Unit of competency
National Code
AURTTM003
State Code
AXA44
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
60
Description
This unit describes the performance outcomes required to apply metal spray and hard chrome and weld materials, and perform the necessary machining to rebuild engine components. It involves preparing for the task, determining repair requirements, rebuilding engine components, bearing tunnels and connecting rods in engines, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The engine components include those in vehicles from all sectors of the industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to undertake metal building procedures
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Information is sourced, procedures and methods are analysed, and appropriate tools are selected for rebuilding engine components
  • 1.3 Tools and measuring equipment are selected and checked for serviceability
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Engine component is prepared for appropriate metal application method according to workplace procedures and safety and environmental requirements
2. Apply metal to engine component
  • 2.1 Metal application process is used to rebuild damaged engine component according to workplace procedures and safety requirements, and following machinery safe operating procedures
  • 2.2 Engine component is measured to ensure compliance with specifications
  • 2.3 Metal application process is completed in readiness for further repair according to workplace procedures and safety requirements, and following machinery safe operating procedures
3. Perform necessary machining to rebuild component
  • 3.1 Machining is carried out according to workplace procedures and safety and environmental requirements, and following machinery safe operating procedures
  • 3.2 Component is measured to ensure compliance with manufacturer specifications
  • 3.3 Machining operations are completed according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and following machinery safe operating procedures
4. Complete rebuild processes
  • 4.1 Component surfaces are finished to manufacturer specifications and within allowable tolerances according to workplace procedures and safety and environmental requirements, and following machinery safe operating procedures
  • 4.2 Final inspection is made to ensure finished work complies with workplace requirements
  • 4.3 Bright surfaces are treated with rust prevention solution and engine component is prepared for further process or storage according to workplace procedures
  • 4.4 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC287 AURTTM3003 Apply metal to rebuild engine components Unit of competency