Unit of competency Outline

Date retreived
23/07/2026 12:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut material using CNC sizing machines

Cut material using CNC sizing machines

Unit of competency
National Code
FWPCOT3331
State Code
ODS84
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/06/2022
Nominal Hours
32
Description
This unit of competency describes the skills and knowledge required to set up and operate computer numerical control (CNC) sizing machines to achieve accurate dimensional cuts of engineered wood products and timber components in a manufacturing facility. Work also involves operator maintenance.The unit applies to individuals who work as production workers, engineered timber products technicians, machine operators or timber fabricators. Operators generally work under broad or limited direction to complete routine activities related to their own work and take responsibility for their work.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cutting engineered wood product or timber
  • 1.1 Review work order, specifications, workplace health and safety requirements, environmental protection practices and emergency procedures for CNC cutting operations and, where required, check with appropriate personnel
  • 1.2 Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices
  • 1.3 Obtain the type and quantity of material to be cut from a storage location
2. Set up the CNC sizing machine
  • 2.1 Set CNC optimising program to meet work specifications
  • 2.2 Check the CNC cutting machine mechanisms, emergency stops, gauges, guards and controls for safe and effective operation
  • 2.3 Adjust the CNC cutting machine settings according to work specifications
  • 2.4 Complete trial run to check system and machine operation for accuracy, quality and dimensions of finished work
  • 2.5 Accept or reject trialled material and dispose of according to environmental protection practices
  • 2.6 Complete final adjustments to CNC optimising program, cutting tools and equipment
3. Operate the CNC sizing machine
  • 3.1 Use the CNC sizing machine, cutting tools and equipment according to workplace health and safety procedures, manufacturer instructions, operating capacity and purpose and environmental protection practices
  • 3.2 Feed engineered wood product or timber into the CNC machine, operate cutting tools according to tooling requirements and regularly monitor to minimise waste and ensure correct dimensions are produced
  • 3.3 Repair or dispose of incorrect cuts, off-cuts and material with defects according to environmental protection practices
  • 3.4 Identify routine processing problems and resolve or report to appropriate personnel
4. Complete operator maintenance
  • 4.1 Lock out the CNC sizing machine according to workplace health and safety procedures
  • 4.2 Check blades for bluntness or damage
  • 4.3 Remove and replace blades according to manufacturer recommendations
  • 4.4 Dispose of used blades according to environmental protection practices
  • 4.5 Keep machine clear of dust and debris according to organisational safety procedures
  • 4.6 Record and report production outcomes, machine and equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXL30 FWPCOT3234 Cut material using CNC sizing machines Unit of competency