Unit of competency Outline

Date retreived
22/07/2026 1:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Handle and transport samples or equipment

Handle and transport samples or equipment

Unit of competency
National Code
MSL952004
State Code
OEX85
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
019909 - Laboratory Technology
Original Release Date
24/05/2023
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge to pick up and transport samples or test/calibration equipment in a way that ensures the integrity of subsequent test results. This unit of competency applies to couriers and laboratory and field assistants in all industry sectors. The person transporting the items is not necessarily responsible for sampling or testing. This unit does not cover sample collection or the ability to handle and transport animals as might be defined under prevailing animal care and ethics legislation and practices. No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Prepare for pickup
  • 1.1 Confirm pickup sequence and any licence or permit requirements with supervisor
  • 1.2 Follow workplace procedures to confirm that vehicle and communication devices are in working order
  • 1.3 Check that required transport containers and materials are in the vehicle
2. Pick up and transport items
  • 2.1 Confirm the number and nature of items to be picked up on arrival from workplace documentation
  • 2.2 Ensure items match documentation
  • 2.3 Follow workplace procedures for the transport of items
  • 2.4 Alert laboratory personnel to any special needs that are identified on documentation accompanying the items
  • 2.5 Complete required documentation at pickup point in accordance with workplace procedures
  • 2.6 Stow items in the specified transport containers and under the required conditions
  • 2.7 Maintain sample integrity in accordance with workplace and item-specific procedures
  • 2.8 Deliver items to correct location in accordance with workplace procedures
  • 2.9 Maintain confidentiality of information
3. Maintain transport equipment
  • 3.1 Maintain vehicle according to workplace requirements
  • 3.2 Maintain transport containers to ensure they are fit for purpose
  • 3.3 Check stock levels of consumables and follow procedures for required restocking
  • 3.4 Replenish stocks of collecting equipment at collection centres as required
4. Maintain a safe work environment
  • 4.1 Use established work safety practices and personal protective equipment (PPE) to ensure personal safety and that of others
  • 4.2 Clean up spills in accordance with workplace procedures
  • 4.3 Minimise the generation of waste and follow workplace procedures for waste disposal
No information
No information
Replaces
State Code National Code Title Type
AWO35 MSL952002 Handle and transport samples or equipment Unit of competency
State Code National Code Title Type
BIX7 MSL30122 Certificate III in Laboratory Skills Qualification
BIX8 MSL20122 Certificate II in Sampling and Measurement Qualification