Unit of competency Outline

Date retreived
22/07/2026 11:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Plan and undertake a routine task

Plan and undertake a routine task

Unit of competency
National Code
PPMPLN210
State Code
AXG57
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
06/05/2016
View on TGA
State Implementation and Classification
Approved Date
25/08/2016
Field of Education
080315 - Project Management
Original Release Date
25/08/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to apply workplace procedures and instructions to plan, undertake and review a routine task, in the pulp and paper industry. The unit applies to those operators who plan, undertake and review a routine task in the pulp and paper industry. A routine task is one related to work tasks and environments, consisting of a series of single linear stages, which are familiar to the individual undertaking the planning activity. Routine tasks are contained within a single system or process in a pulp or paper manufacturing facility.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify task requirements
  • 1.1. Identify task requirements within work health and safety (WHS) procedures, environmental procedures, standard operating procedures (SOP) and housekeeping requirements.
  • 1.2. Obtain, clarify and understand instructions on documentation and procedures.
  • 1.3. Obtain, clarify and understand information to assist planning and specifications for task outcomes.
  • 1.4. Identify completion time and quality measures for task requirements.
2. Plan steps required to complete task
  • 2.1. Clarify and understand individual steps or activities required to undertake tasks.
  • 2.2. Check planned steps and outcomes to ensure conformity with instructions and relevant specifications.
  • 2.3. Complete required sequence of activities as identified in the plan.
3. Review plan
  • 3.1. Compare task outcomes with the planned objectives, task instructions, specifications and task requirements.
  • 3.2. Review the plan, when necessary, to better meet objectives and task requirements.
  • 3.3. Make adjustments to plan, report to an authorised person or rectify the problem, within level of responsibility, according to SOPs.
No information
No information
Replaces
State Code National Code Title Type
AUY22 FPPPLN210A Plan and undertake a routine task Unit of competency
State Code National Code Title Type
BAH5 PPM20216 Certificate II in Papermaking Operations Qualification
BAH4 PPM20116 Certificate II in Pulping Operations Qualification