Unit of competency Outline

Date retreived
22/07/2026 9:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct cast in-situ pilings operations

Conduct cast in-situ pilings operations

Unit of competency
National Code
RIICFW305D
State Code
WH096
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
32
Description
This unit describes a participant’s skills and knowledge required to conduct cast in-situ pilings operations in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct in-situ pilings operations
  • 1.1 Access, interpret and apply documentation to boring of cast in-situ piles and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Confirm and apply environmental protection and safety requirements
  • 1.4 Obtain, interpret and implement traffic management signage
  • 1.5 Select plant, tools and equipment and check for faults to carry out tasks
  • 1.6 Select and wear correct personal protective equipment appropriate for work activities
  • 1.7 Identify, address and report environmental issues, potential hazards and risks
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Locate and prepare pile positions
  • 2.1 Establish location for piles from reference points and set out
  • 2.2 Position and check plant and related equipment for operation
  • 2.3 Bore hole
  • 2.4 Check caisson for conformity with specification
  • 2.5 Install caisson in the bored hole
  • 2.6 Prepare caisson to receive concrete
3. Place concrete
  • 3.1 Place concrete into caisson
  • 3.2 Vibrate concrete, removing voids and air pockets
4. Remove boring rig
  • 4.1 Relocate boring rig to next point of installation operation
  • 4.2 Remove boring rig from site on completion of work
5. Clean up
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCX11 RIICFW305E Conduct cast in-situ pilings operations Unit of competency