Unit of competency Outline

Date retreived
23/07/2026 12:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and test gaming/games equipment

Set up and test gaming/games equipment

Unit of competency
National Code
UEENEEH009B
State Code
W7957
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
09/11/2010
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
09/11/2010
Nominal Hours
54
Description
1)1.1) DescriptorThis unit covers setting-up of electronic gaming and games equipment to manufactures' instructions in compliance with regulations. It encompasses safe working practices, connection and secure placement of gaming/games equipment, following written and oral instruction and procedures and customer relations.
Notes
Elements and Performance Criteria
1 Prepare to set up gaming equipment.
  • 1.1 OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.
  • 1.2 Established OHS risk control measures and procedures are followed in preparation for the work.
  • 1.3 Safety hazards, which have not previously been identified, are reported and advise on risk control measures, are sought from the work supervisor.
  • 1.4 Details and location of the equipment to be set up are obtained from purchase documentation or from work supervisor to establish the scope of work to be undertaken.
  • 1.5 Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others.
  • 1.6 Materials that may be required for the work are obtained and checked in accordance with routines and procedures.
  • 1.7 Tools and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
2 Set up gaming equipment.
  • 2.1 Established OHS risk control measures and procedures for carrying out the work are followed.
  • 2.2 Circuits/equipment are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
  • 2.3 Equipment is placed in accordance with regulatory and customer requirements.
  • 2.4 Equipment is connected in accordance with manufacturer's instructions and regulatory and customer requirements. (see note 1)
  • 2.5 Equipment operating functions are set to regulatory and customer requirements and tested for correct operation.
  • 2.6 Procedures for referring non-routine events to immediate supervisor for directions are followed.
  • 2.7 Equipment set up is carried out efficiently without waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practices.
3 Complete system set up and report.
  • 3.1 OHS risk control work completion measures and procedures are followed.
  • 3.2 Work area is cleaned and made safe in accordance with established routines.
  • 3.3 Documentation detailing equipment maintenance and operating instructions is handed over to the customer.
  • 3.4 Work supervisor is notified of the completion of the work in accordance with established routine.
No information
No information
Replaced By
State Code National Code Title Type
WC539 UEENEEH109A Set up and test gaming and game equipment Unit of competency
State Code National Code Title Type
W434 UEE31107 Certificate III in Gaming Electronics Qualification