Unit of competency Outline

Date retreived
22/07/2026 9:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct post blast analysis

Conduct post blast analysis

Unit of competency
National Code
DEFEXO126
State Code
AVR63
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
27/03/2024
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
039999 - Engineering And Related Technologies, N.e.c.
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to analyse a blast site following an incident involving explosive ordnance. The individual would examine the site to identify the nature of the blast and provide advice to authorities on the incident. The incident may include accidents or intentional blasts using explosive ordnance or improvised explosive devices.This unit applies to those required to conduct an analysis of a site following an explosive ordnance incident.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently and/or as part of a team, under indirect supervision. They would use discretion and judgement and take responsibility for the quality of their outputs while performing complex tasks in a broad range of contexts that could be unpredictable.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for post-blast analysis
  • 1.1 Conduct planning prior to arrival at scene
  • 1.2 Identify and apply safety and security requirements
  • 1.3 Identify and prepare for use equipment, tools and stores required for post-blast analysis
2 Examine blast site
  • 2.1 Establish and maintain liaison with other agencies
  • 2.2 Examine blast site
  • 2.3 Document data recording, within resource limitations
3 Analyse the data and determine incident cause
  • 3.1 Analyse incident data
  • 3.2 Seek specialist advice in accordance with analysis requirements
  • 3.3 Draw conclusions from analysis to determine the cause of the incident
4 Maintain documentation and share information
  • 4.1 Document analysis process
  • 4.2 Provide information related to the cause of the incident to authorities
  • 4.3 Provide evidence to inquiries/courts as required
No information
No information
No information