Unit of competency Outline
Date retreived
22/07/2026 8:54 AM AWST
22/07/2026 8:54 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Program coordinate measuring machines (advanced)
Program coordinate measuring machines (advanced)
Unit of competency
National Code
MEM12022B
MEM12022B
State Code
W5491
W5491
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/06/2011
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/06/2011
Nominal Hours
18
Description
This unit covers writing, trialling and editing programs for coordinate measuring machines to measure features of parts in multiple planes using multiple probes.
Notes
Elements and Performance Criteria
1. Determine program requirements
- 1.1. Part parameters and measurement requirements are determined.
- 1.2. Program attributes are established according to standard operating procedures.
2. Determine probe configuration for multiple probes
- 2.1. Probe configuration is determined according to standard operating procedures.
- 2.2. Probe angles are determined and multiple probes are qualified.
3. Create multiple Direct Computer Control (DCC) alignment
- 3.1. Multiple DCC alignment is created according to standard operating procedures.
- 3.2. DCC sub-routines are integrated.
4. Construct advanced geometric features
- 4.1. Geometric features are determined and constructed.
- 4.2. Features are dimensioned according to standard operating procedures.
5. Review and maintain part programs/system
- 5.1. Part programs are reviewed/edited to comply with changes to specifications.
- 5.2. System wide options are changed.
- 5.3. Programs are archived and backed up according to standard operating procedures.
- 5.4. Results are output to various formats according to standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to perform advanced programming of a coordinate measuring machine. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with advanced programming of a coordinate measuring machine or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to perform advanced programming of a coordinate measuring machine. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with advanced programming of a coordinate measuring machine or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M1782 | MEM12.22AA | Program coordinate measuring machine (advanced) | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAV36 | MEM12022 | Program coordinate measuring machines (advanced) | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J368 | MEM60112 | Advanced Diploma of Engineering | Qualification |
| W249 | MEM60105 | Advanced Diploma of Engineering | Qualification |
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |
| J367 | MEM50212 | Diploma of Engineering - Technical | Qualification |
| W248 | MEM50205 | Diploma of Engineering - Technical | Qualification |
| W528 | MSA60108 | Advanced Diploma of Manufacturing Technology | Qualification |
| W526 | MSA50108 | Diploma of Manufacturing Technology | Qualification |