Unit of competency Outline

Date retreived
23/07/2026 7:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare uncoated surfaces for painting

Prepare uncoated surfaces for painting

Unit of competency
National Code
CPCCPD3035
State Code
OCQ03
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
25
Description
This unit of competency specifies the skills and knowledge required to prepare uncoated surfaces for the application of paint.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to prepare uncoated surfaces for painting.
  • 1.2 Plan all work to meet relevant requirements of Australian Standards, work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and fit personal protective equipment (PPE) as required for each task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
2 Prepare uncoated surfaces.
  • 2.1 Determine and test condition and nature of substrate and surface material by conducting a moisture test.
  • 2.2 Select surface preparation method in accordance with environmental, finish and substrate requirements.
  • 2.3 Prepare surfaces by removing loose debris.
  • 2.4 Repair and fill surfaces to a smooth finish ready for painting.
3 Clean up.
  • 3.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.
  • 3.2 Check and maintain tools and equipment and clean with appropriate solvents.
  • 3.3 Store tools, equipment and sealed unused materials to avoid spontaneous combustion.
No information
No information
No information
State Code National Code Title Type
BGX80 52921WA Course in Painters Registration Accredited course
BGE5 CPC30620 Certificate III in Painting and Decorating Qualification