Unit of competency Outline

Date retreived
22/07/2026 9:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct sewing operations

Conduct sewing operations

Unit of competency
National Code
AURVTT012
State Code
AWZ09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to conduct sewing operations using hand and machine techniques. It involves preparing for the task, selecting and using specialist sewing tools and equipment, selecting materials, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry. It includes a range of automotive or marine trimming applications.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out sewing work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Components are identified and materials selected and inspected for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Sewing tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Sew automotive or marine components and trim
  • 2.1 Sewing machine is set up correctly and adjustments are made during sewing operations
  • 2.2 Hand and machine sewing operations are carried out according to workplace instructions and safety and environmental requirements
  • 2.3 Sewing activities are completed within workplace timeframes
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF564 AURVTT3012 Carry out sewing operations Unit of competency