Unit of competency Outline

Date retreived
22/07/2026 1:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct routine wind turbine maintenance

Conduct routine wind turbine maintenance

Unit of competency
National Code
UEPOPS251
State Code
OAH22
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to conduct a range of routine maintenance functions associated with wind turbines. Routine maintenance functions associated with wind turbines are required to ensure the smooth operation of mechanical plant and equipment. Competency in this unit requires the ability to plan for plant in-service checks, carry out in-service mechanical checks and complete work. Individuals will, in general, work as an operator in a power generation facility. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Work requirements are identified, in accordance with workplace procedures, from work orders and are confirmed with appropriate personnel or by site inspection
  • 1.2 Work, Health and Safety (WHS)Occupational, Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are identified, applied and monitored
  • 1.3 Resources are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
  • 1.4 Plans, drawings and manuals are selected, in accordance with workplace procedures
  • 1.5 Correct size, type and quantity of materials and components are obtained and inspected, in accordance with workplace procedures
  • 1.6 Work sequenced and prioritised, in accordance with workplace procedures and site requirements
  • 1.7 Potential hazards are identified and risk control measures are selected, in accordance with workplace procedures
  • 1.8 Work area is prepared, in accordance with workplace procedures
2 Conduct routine maintenance
  • 2.1 Isolations are confirmed, where appropriate, in accordance with workplace procedures
  • 2.2 Routine maintenance on wind turbine is conducted, in accordance with workplace procedures and site requirements
  • 2.3 Minor adjustments of wind turbine are undertaken, in accordance with workplace procedures, maintenance schedules and site requirements
  • 2.4 Wind turbine faults are reported to appropriate personnel, in accordance with workplace procedures
3 Complete work
  • 3.1 Maintenance work is completed and appropriate personnel are notified, in accordance with workplace procedures
  • 3.2 Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • 3.3 Tools and equipment are maintained and stored, in accordance with workplace procedures
  • 3.4 Work completion details are finalised, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE324 UEPOPS251A Conduct routine wind turbine maintenance Unit of competency
Replaced By
State Code National Code Title Type
ODZ15 UEPOPS016 Conduct routine wind turbine maintenance Unit of competency
State Code National Code Title Type
BEB9 UEP20118 Certificate II in ESI Generation - Operations Support Qualification