Unit of competency Outline

Date retreived
23/07/2026 4:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify and select explosive products

Identify and select explosive products

Unit of competency
National Code
AHCEXP302
State Code
BAT16
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
12/01/2017
Nominal Hours
10
Description
This unit of competency describes the skills and knowledge required to identify and select explosive products and suitable mixtures that can be used for blasting for agricultural or land management purposes.This unit applies to individuals who work under broad direction and take responsibility for their own work. This includes using discretion and judgement in the selection and use of available resources.Licensing conditions apply to this unit. Specific determination should be sought through the relevant State or Territory.
Notes
Elements and Performance Criteria
1. Identify explosives applications
  • 1.1 Identify the job application requiring the use of explosives in consultation with the field manager or supervisor
  • 1.2 Identify the site for blasting and check the surrounding area to confirm that all aspects of safety have been considered and actioned
  • 1.3 Identify risks and potential side effects of the blast after consideration of all site characteristics and use information in the planning of blasting operations
  • 1.4 Consider environmental implications of the intended explosives usage when planning blasting activities
  • 1.5 Consider and utilise alternatives to the use of explosives when planning the application, as appropriate
  • 1.6 Follow work health and safety policies and procedures when handling or using explosives to maintain own, fellow workers’ and public safety
2. Select explosives components
  • 2.1 Select explosive products to match the application, site and identified hazards at the blasting site
  • 2.2 Make sure explosives or components are not damaged or defective before use
  • 2.3 Establish the quantity of explosive energy required in line with the site characteristics and the designated application
  • 2.4 Ensure initiator device selection reflects industry best practice and matches explosives selection
  • 2.5 Utilise safety fuses as required to suit the application
  • 2.6 Make sure the use of explosives complies with relevant legislative requirements and Australian Standards
No information
No information
Replaces
State Code National Code Title Type
D6814 AHCEXP302A Identify and select explosive products Unit of competency
Replaced By
State Code National Code Title Type
OCU18 AHCEXP304 Identify and select explosive products Unit of competency
No information