Unit of competency Outline

Date retreived
22/07/2026 1:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply pattern specifications to saddlery products

Apply pattern specifications to saddlery products

Unit of competency
National Code
MSTLG3006
State Code
BAV26
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
01/12/2016
Nominal Hours
150
Description
This unit of competency covers the skills and knowledge required to apply pattern specifications to the production of saddlery products.The unit applies to the interpretation of pattern specifications; checking against client needs; modifying the pattern, where necessary, and applying the pattern to the production of a saddlery product, such as a saddle, bridle or saddle blanket. It applies to individuals working largely independently and being accountable for own results, including:carrying out assigned taskscoordinating processessetting and working to deadlines.Work may be conducted in small to large scale enterprises and may involve individual and team activities. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Determine pattern requirements
  • 2.1 Access information about customer requirements
  • 2.2 Interpret pattern specifications for identified saddlery product and compare with customer, industry and quality requirements
  • 2.3 Identify customisation requirements and any additional expertise required for production
  • 2.4 Customise pattern from existing pattern, as appropriate
  • 2.5 Identify leather requirements and pattern specifications from customer
3 Prepare for production
  • 3.1 Set up work area in accordance with specifications and workplace procedures
  • 3.2 Identify production tasks, and select and prepare tools and equipment
  • 3.3 Select leather, and check for quality and faults
4 Produce saddlery product
  • 4.1 Conduct sequence of operations to produce saddlery product
  • 4.2 Test stitching for strength and accuracy and trim product
  • 4.3 Apply embossing and other design elements
  • 4.4 Identify any faults or differences from specifications and repair or resolve
5 Finish production
  • 5.1 Finish product by hand or machine
  • 5.2 Check product satisfies quality specifications and review with customer to ensure customer satisfaction
  • 5.3 Finalise production and complete housekeeping and relevant documentation
No information
No information
Replaces
State Code National Code Title Type
W7391 LMTLG3006A Apply pattern specifications to saddlery products Unit of competency
State Code National Code Title Type
BDH6 MST30516 Certificate III in Leather Production Qualification
BFA3 MST30519 Certificate III in Leather Production Qualification