Unit of competency Outline

Date retreived
22/07/2026 7:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and apply hardware

Select and apply hardware

Unit of competency
National Code
MSFFM2003
State Code
WI412
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
19/06/2014
Nominal Hours
16
Description
This unit of competency covers selecting and applying hardware to new and refurbished furniture.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Work instructions are used to determine job requirements, including design, colour, finish process and required hardware quality
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Types of hardware are identified and selected for the work
  • 1.4 Tools, equipment and accessories for application are identified and checked for safe and effective operation
  • 1.5 Surfaces are cleaned and prepared to enable accurate colour matching
2 Apply and/or fit and finish
  • 2.1 Hardware items are laid out/placed in the required design
  • 2.2 Machinery is used in accordance with workplace procedures, including use of personal protective equipment
  • 2.3 Joining/securing process is undertaken according to workplace procedures
  • 2.4 Adhesives are applied according to workplace procedures and/or manufacturer instructions
  • 2.5 Work is checked against required quality standards
3 Finalise operation and maintain equipment
  • 3.1 Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 3.2 Machinery is cleaned and left in a safe mode
  • 3.3 Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
  • 3.4 Unused hardware is collected and stored for re-use or disposal following workplace procedures
  • 3.5 Waste and scrap materials are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8825 LMFFM2003B Select and apply hardware Unit of competency
Replaced By
State Code National Code Title Type
OEL25 MSFFM2014 Select and apply hardware Unit of competency