Unit of competency Outline
Date retreived
23/07/2026 1:47 PM AWST
23/07/2026 1:47 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Remove and install basic aircraft instrument system components
Remove and install basic aircraft instrument system components
Unit of competency
National Code
MEAAVI0004
MEAAVI0004
State Code
OEH89
OEH89
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to apply hand skills and use maintenance documentation and publications to remove and install basic aircraft instrument system components during scheduled or unscheduled maintenance of fixed and rotary wing aircraft that have basic instrument systems. Work may be performed individually or as part of a team.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Remove basic aircraft instrument system components
- 1.1 Render system safe and prepare it in accordance with maintenance manual, fitting required isolation tags to ensure personnel safety
- 1.2 Remove instrument components in accordance with maintenance manual while observing all relevant work health and safety (WHS) requirements
- 1.3 Complete and process required maintenance documentation relating to removal in accordance with standard enterprise procedures
- 1.4 Tag and pack removed components in accordance with industry, enterprise and manufacturer procedures
2. Install basic aircraft instrument system components
- 2.1 Confirm correct part numbers, modification status, serviceability and shelf life of electrical components to be installed against maintenance manual
- 2.2 Perform physical installation of instrument components in accordance with the applicable maintenance manual and regulatory requirements, and ensure appropriate adjustment or alignment is carried out
- 2.3 Reinstate system to operational condition in preparation for testing, as necessary and in accordance with maintenance manual
- 2.4 Complete and process required maintenance documentation relating to installation in accordance with standard enterprise procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUE53 | MEA204 | Remove and install basic aircraft instrument system components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDW5 | MEA40618 | Certificate IV in Aeroskills (Avionics) | Qualification |