Unit of competency Outline

Date retreived
24/07/2026 2:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Work as a safety observer/spotter

Work as a safety observer/spotter

Unit of competency
National Code
RIIRTM203E
State Code
OCW77
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
061301 - Occupational Health And Safety
Original Release Date
18/06/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to work safely as a safety observer/spotter in civil construction. This includes identifying and managing worksite hazards, establishing exclusion zones and observing work activities to monitor the safety of the work environment. It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take some responsibility for the quality of work outcomes.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to work as a safety observer/spotter
  • 1.1 Obtain, interpret, clarify and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to work as a safety observer/spotter
  • 1.3 Select and wear personal protective equipment according to site requirements
  • 1.4 Identify and address potential risks, hazards and environmental issues, and implement control measures within scope of role
  • 1.5 Identify, confirm and apply environmental protection requirements
  • 1.6 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.7 Coordinate work activities with others according to job requirements and within scope of own role
2. Identify and manage hazards
  • 2.1 Confirm working areas permit vehicle, plant and pedestrian access
  • 2.2 Check where personnel working on foot are in close proximity to moving plant
  • 2.3 Conduct site specific risk assessment and confirm hazards have been identified and safety controls in place from traffic management plan
3. Support work activities
  • 3.1 Operate communication devices to support work activities
  • 3.2 Maintain exclusion, no-go and pedestrian zones according to job and safety requirements
  • 3.3 Maintain sight visibility of work being performed
  • 3.4 Communicate to required personnel any hazards identified during work activities
4. Conduct clean-up activities
  • 4.1 Confirm tools and equipment are cleaned, checked, maintained and stored according to manufacturer specifications and site requirements
  • 4.2 Confirm work area is checked, cleaned and tidy according to site requirements
No information
No information
Replaces
State Code National Code Title Type
AWB79 RIIRTM203D Work as a safety observer/spotter Unit of competency